10BASE-T Stackable Hubs
If you are installing the hub as a free-standing unit, apply the four self-
adhesive rubber feet to the bottom of the hub chassis. Make sure the bottom
surface of the chassis is clean and dry. Stand the chassis up-on-end and
attach one rubber foot about 1 inch from each corner.
The hubs can be used standalone on a tabletop or shelf, or mounted in a rack.
When mounting the hub stack in a rack, confirm that the rack is an EIA
standard 19-inch rack. For rack mounting convenience, a pair of mounting
brackets is included in the package. Attach the mounting brackets with the
enclosed machine screws, and then mount the hub in the rack using screws
included with the rack.
Figure 3 -1 Rack-Mounting
Setting Up the Hub