Video/Hdmi - Yamaha RX-V3085 Owner's Manual

Video/HDMI

Configures the video/HDMI settings.
■ Information
Displays information about the current video signal and the TVs connected to the HDMI OUT
jacks.
Choices
HDMI Signal Presence or absence of HDMI signal input/output
HDMI Resolution Resolutions of input signal (analog or HDMI) and output signal (HDMI)
HDMI Monitor
Resolutions supported by the TV
Video Resolution
■ Video Mode
Configures the video signal processing settings.
Video Mode
Enables/disables the video signal processing (resolution, aspect ratio and video adjustments).
Settings
Direct Disables the video signal processing.
Enables the video signal processing.
Processing
Configure the settings in "Resolution", "Aspect" and "Adjustment".
X
When "Video Mode" is set to "Direct", the unit transmits video signals with the least circuitry in order to reduce
video output delay.
Resolution
Selects a resolution to output HDMI video signals when "Video Mode" is set to "Processing".
Settings
Through Does not convert the resolution.
Auto Selects a resolution automatically in accordance with TV resolution.
Output video signals with a selected resolution.
480p/576p, 720p,
1080i, 1080p, 4K
(Only the resolutions supported by your TV are selectable.)
X
If you need to select a resolution that is not supported by your TV, set "MONITOR CHECK" (p.157) in the
"ADVANCED SETUP" menu to "SKIP" and try again. (Note that the output video may not be displayed on your TV
normally.)
Aspect
Selects an aspect ratio to output HDMI video signals when "Video Mode" is set to "Processing".
Settings
Through Does not convert the aspect ratio.
Outputs 4:3 video signals to a 16:9 TV with black bands on either side of the
16:9 Normal
screen.
X
This setting functions only when 480i/576i or 480p/576p signals are converted into 720p, 1080i, 1080p, or 2160p
(4K) signals.
140
En