Table of Contents
Advertisement
■
Audio Receive
Configures the Bluetooth settings when the unit is used as the Bluetooth audio receiver.
Disconnect
Terminates the Bluetooth connection between a Bluetooth device (such as a smartphone) and
the unit.
■
Procedure
1
Select "Disconnect" and press ENTER to terminate the Bluetooth connection.
X
This setting is not available when no Bluetooth devices are connected.
Bluetooth Standby
Selects whether to enable/disable the function that turns on the unit from Bluetooth devices
(Bluetooth standby). If this function is set to "On", the unit automatically turns on when a
connect operation is performed on the Bluetooth device.
Settings
Off
Disables the Bluetooth standby function.
Enables the Bluetooth standby function.
On
(The unit consumes more power than when "Off" is selected.)
X
This setting is not available when "Network Standby" (p.144) is set to "Off".
Multi Zone
Configures the multi zone settings.
■
Information
Displays information about Zone2, Zone3 and Zone4.
Choices
On/Off
Displays the status of each zone.
Input
The input source selected for Zone2, Zone3 and Zone4.
Volume
The volume setting for Zone2 and Zone3.
Tone Control
The tone control setting (the level of Treble and Bass) for Zone2 and Zone3.
■
Zone2, Zone3 Set
Configures the Zone2 or Zone3 settings.
Volume
Enables/disables volume adjustments for Zone2 or Zone3 output.
If you have connected an external amplifier with volume control to the unit, disable the volume
adjustment for the corresponding zone.
Settings
Fixed
Disables volume adjustments for Zone2 or Zone3 output.
Variable
Enables volume adjustments for Zone2 or Zone3 output.
X
This setting is not available depending on the "Power Amp Assign" setting (p.128).
147
En
Advertisement
Table of Contents
