Connecting Other Devices; Connecting A Device Compatible With The Trigger Function; Connecting The Power Cable - Yamaha RX-V3085 Owner's Manual

5

Connecting other devices

Connect a device compatible with the trigger function.
Connecting a device compatible with the trigger
function
The trigger function can control an external device in conjunction with operating the unit (such
as powering on/off and input selection). If you have a Yamaha subwoofer that supports a
system connection or a device with a trigger input jack, you can use the trigger function by
connecting the external device to one of the TRIGGER OUT jacks with a monaural mini-plug
cable.
TRIGGER OUT 1-2 jacks
The unit (rear)
TRIGGER
OUT
DMI (HDCP2.2) NETWORK
HDMI OUT (4 NET)
AV 4 AV 5 AV 6 AV 7 (HDCP2.2)
(8 SERVER)
1
3
(ZONE OUT)
12V 0.1A
TRIGGER
OUT MAX. TOTAL
1
REMOTE RS-232C
12V 0.1A
IN OUT 2
MAX. TOTAL
2
(FRONT) PRE OUT
1
R L
2
(REAR)
SUR. BACK CENTER FRONT
SUBWOOFER
SPEAKERS
EXTRA SP2
SURROUND BACK L R L CENTER R FRONT L
R.PRESENCE
ZONE 2/ZONE 3/F.PRESENCE
X
You can configure the trigger function settings in "Trigger Output1" and "Trigger Output2" (p.153) in the "Setup"
menu.
Trigger In
Power amplifier
(+12V)
(such as MX-A5000)
System
connector
Yamaha
jack
subwoofer
En
6

Connecting the power cable

After all the connections are complete, connect the supplied power cable to the unit and then
to an AC wall outlet.
The unit (rear)
NETWORK
HDMI OUT
(4 NET)
(HDCP2.2)
(8 SERVER)
3
ZONE OUT)
AC IN
OTE RS-232C
OUT
L
EXTRA SP1
CENTER R FRONT L R L
F.PRESENCE
ZONE 2/ZONE 3/BI-AMP
51
To an AC wall outlet