Controlling Zone2, Zone3 Or Zone4 - Yamaha RX-V3085 Owner's Manual

MAIN/ZONE
MAIN 2 3 4
z
SLEEP SLEEP ZON ZONE
PARTY T T PARTY PURE DIRECT PURE DIRECT HDMI OUT HDMI OUT
SCENE SCENE
1 1 2 2 3 3 4 4
5 5 6 6 7 7 8 8
INPUT
Input selection keys
TUNER NET USB BLUETOOTH
PRESET PRESET
RED RED GREEN GREEN YELLOW YELLOW BLUE BLUE
TOP TOP POP-UP POP-UP
HOME HOME
MENU MENU /MENU / / MENU
AI AI
SUR. DECODE SUR. DECODE
PROGRAM PROGRAM VOLUME VOLUME
ENHANCER ENHANCER
STRAIGHT STRAIGHT
MEMORY MEMORY
TUNING TUNING BAND BAND TUNING TUNING

Controlling Zone2, Zone3 or Zone4

1
Use the ZONE switch to select a zone.
2
Press z (receiver power).
Each time you press the key, the selected zone is enabled or
disabled.
When zone audio output is enabled, the corresponding zone
indicator lights up in the front display.
3
Use the input selection keys to select an input source.
Y
• Audio signals that can be output to each zone vary depending on how you
connect the device in each zone to the unit's output jacks. For details, see
"Multi-zone output" (p.182).
• You cannot select Bluetooth, USB and network sources exclusively for each
zone. For example, if you select "SERVER" for Zone2 when "USB" is selected
for the main zone, the input source for the main zone also switches to
"SERVER".
4
Start playback on the external device or select a radio
station.
Refer to the instruction manual for the external device.
For details on the following operations, see the corresponding
pages.
• Listening to FM/AM radio (China model only) (p.82)
• Listening to DAB radio (Australia model only) (p.84)
• Listening to FM radio (Australia model only) (p.90)
• Playing back music via Bluetooth (p.93)
• Playing back music stored on a USB storage device (p.94)
• Playing back music stored on media servers (PCs/NAS) (p.98)
• Listening to Internet radio (p.102)
• Playing back iTunes/iPod music with AirPlay (p.105)
Y
AirPlay is available in Zone2 and Zone3 only when AirPlay playback is ongoing in
the main zone.
X
• The Zone2/Zone3 input automatically switches in conjunction with the input
• To play back DSD audio or signals with a sampling frequency of 352.8 kHz or
• Depending on the "Remote Key" (p.151) setting in the "System" menu, the
Caution
To avoid unexpected noise, never play back DTS-CDs in Zone2, Zone3 or Zone4.
111
En
source selected in the main zone when "Main Zone Sync" is selected as the
Zone3/Zone3 input.
384 kHz in Zone2, select "Main Zone Sync" as the Zone2 input, or use the party
mode (p.112).
PROGRAM key may be also available in Zone2.