Configuring The System Settings (Advanced Setup Menu); Advanced Setup Menu Items; Selecting The Remote Control Id (Remote Id); Setting Tuner Frequency Step (Tu) - Yamaha R-N402 Owner's Manual

Configuring the system settings (ADVANCED SETUP menu)

Configure the system settings of the unit while viewing the front display.
1
Press A (power) on the front panel to turn off
the unit.
2
While holding down RETURN on the front
panel, press A (power).
DISPLAY MODE MEMORY
BASS
PHONES SPEAKERS
USB
5V A
A
DISPLAY
(power)
3
Rotate SELECT/ENTER to select an item.
4
Press SELECT/ENTER to select a setting.
5
Press A (power) to set the unit to turn off and
turn it on again.
The new settings take effect.

ADVANCED SETUP menu items

Item
Selects the unit's remote control ID.
REMOTE ID
Sets tuner frequency step.
*
TU
Restores the default settings.
INIT
Updates the firmware.
UPDATE
Checks the version of firmware
VERSION
currently installed on the unit.
* Only for Asia, General, Brazil models
40
En
RETURN
Wi Fi
BLUETOOTH
BAND PRESET TUNING
VOLUME
SELECT
TREBLE INPUT PUSH ENTER
RETURN
CONNECT
SELECT/ENTER
Function Page
Selecting the remote control ID
(REMOTE ID)
When multiple receivers are used in the same room,
setting the remote control ID of this unit to ID1 (and
setting the other receiver to something other than ID1) can
avoid interference from other remote controls.
Settings
ID1 (default), AUTO
y
The remote control for certain Yamaha CD players enables you to
turn the power to this unit on or off.

Setting tuner frequency step (TU)

Selects the step size for locating tuner frequencies.
Settings
FM100/AM10, FM50/AM9 (default)

Restoring the default settings (INIT)

Restores the default settings for the unit.
Choices
CANCEL
Does not perform an initialization.
(default)
Initializes all of the network, Bluetooth and USB
settings. If you initialize the unit, all presets for
NETWORK
40
the network and USB input sources (p. 34) will be
cleared.
40
Restores the default settings for the unit.
ALL
40
41
41