Configuring The System Settings (Advanced Setup Menu); Advanced Setup Menu Items; Selecting The Remote Control Id (Remote Id) - Yamaha HTR-2067 Owner's Manual

Configuring the system settings (ADVANCED SETUP menu)

Configure the system settings of the unit while viewing the front display.
1
Set the unit to standby mode.
2
While holding down STRAIGHT on the front panel, press z (power).
z (power)
PROGRAM STRAIGHT
3
Press PROGRAM to select an item.
4
Press STRAIGHT to select a setting.
5
Press z (power) to set the unit to standby mode and turn it on again.
The new settings take effect.

ADVANCED SETUP menu items

• Default settings are underlined.
Item Function
REMOTE ID Selects the unit's remote control ID.
(Asia and General models only)
TU
Changes the FM tuning frequency setting.
TV FORMAT Switches the video signal type of HDMI output.
INIT Restores the default settings.
VERSION Checks the version of firmware currently installed on the unit.

Selecting the remote control ID (REMOTE ID)

CHARGE ENHANCER STEREO TUNED
OUT
ECO
REMOTE ID••ID1
Change the unit's remote control ID so that it matches the remote control's ID (default:
ID1). When using multiple Yamaha AV receivers, you can set each remote control with a
unique remote control ID for its corresponding receiver.
Settings
ID1, ID2
■
Changing the remote control ID of the remote control
1
To select ID1, hold down the cursor key (e) and SCENE (BD/DVD) together for 3
seconds.
To select ID2, hold down the cursor key (e) and SCENE (TV) together for 3
seconds.
CONFIGURATIONS ➤ Configuring the system settings (ADVANCED SETUP menu)
SLEEP MUTE
VOL.
ADAPTIVE DRC VIRTUAL
Page
50
51
51
51
51
50
En