Yamaha RX-V3085 Owner's Manual page 59

MAIN 2 3 4 MAIN 2 3 4
SLEEP SLEEP ZONE ZONE
PARTY T T PARTY PURE DIRECT PURE DIRECT HDMI OUT HDMI OUT
SCENE SCENE
1 1 2 2 3 3 4 4
5 5 6 6 7 7 8 8
INPUT INPUT
TUNER TUNER NET NET USB USB BLUETOOTH BLUETOOTH
PRESET PRESET
RED RED GREEN GREEN YELLOW YELLOW BLUE BLUE
Cursor keys
ENTER
RETURN
TOP TOP POP-UP POP-UP
HOME HOME
MENU MENU / / MENU /MENU
AI AI
SUR. DECODE SUR. DECODE
PROGRAM PROGRAM VOLUME VOLUME
ENHANCER ENHANCER
STRAIGHT STRAIGHT
MEMORY MEMORY
TUNING TUNING BAND BAND TUNING TUNING
5
Set the YPAO microphone at the top of the pole and perform the
fourth angle measurement.
The following screen appears on the TV when the fourth angle
measurement finishes.
3
To check the measurement results, use the cursor keys to
select "Measurement result" and press ENTER.
After confirming the result, press RETURN to return to the
"Measurement Finished" screen.
X
For details, see "Checking the measurement results" (p.63).
4
To save the measurement results, use the cursor keys to
select "Save" and press ENTER.
The adjusted speaker settings are applied.
X
To finish the measurement without saving the result, select "Cancel".
5
Disconnect the YPAO microphone from the unit.
This completes optimization of the speaker settings.
Caution
The YPAO microphone is sensitive to heat, so should not be placed anywhere
where it could be exposed to direct sunlight or high temperatures (such as on
top of AV equipment).
59
En