Configuring The System Settings (Advanced Setup Menu); Advanced Setup Menu Items - Yamaha RX-A3060 Owner's Manual

Configuring the system settings
(ADVANCED SETUP menu)
Configure the system settings of the unit while viewing the front display.
1
Set the unit to standby mode.
2
While holding down STRAIGHT on the front panel, press MAIN ZONE z.
MAIN ZONE z
STRAIGHT
PROGRAM
3
Press PROGRAM to select an item.
4
Press STRAIGHT to select a setting.
5
Press MAIN ZONE z to set the unit to standby mode and turn it on again.
The new settings take effect.

ADVANCED SETUP menu items

X
Default settings are underlined.
Item
SPEAKER IMP. Changes the speaker impedance setting.
REMOTE SENSOR Turns on/off of the remote control sensor on the main unit.
REMOTE CON AMP Selects the unit's remote control ID.
(Brazil, Asia and General models only)
TUNER FRQ STEP
Changes the FM/AM tuning frequency setting.
TV FORMAT Switches the video signal type.
MONITOR CHECK Removes the limitation on HDMI video output.
4K MODE Selects the HDMI 4K (60 Hz/50 Hz) signal format.
Creates backup of the settings of the unit, or recovers the settings from
RECOV./BACKUP
the backup.
INITIALIZE Restores the default settings.
FIRM UPDATE Updates the firmware.
VERSION Checks the version of firmware currently installed on the unit.
153
En
Function Page
154
154
154
154
155
155
155
155
156
156
156