Table of Contents
Advertisement
Max Volume
Sets the Zone2 or Zone3 limit value of the volumes.
Setting range
-60.0 dB to +15.0 dB (5.0 dB increments), +16.5 dB [20.5 to 95.5 (5.0 increments), 97.0]
X
This setting is available only when "Volume" is set to "Variable".
Initial Volume
Sets the Zone2 or Zone3 initial volume for when the unit is turned on.
Settings
Off
Sets the level at the volume level of the unit when it last entered standby mode.
Sets at Mute or the specified volume level (-80.0 dB to +16.5 dB, 0.5 dB increments) [0.5 to
On
97.0 (0.5 increments)].
(Specify a volume level which is lower than the "Max Volume" setting.)
X
This setting is available only when "Volume" is set to "Variable".
Audio Delay
Adjusts the audio output timing for Zone2 or Zone3 so that the audio is synchronized with the
video.
Setting range
0 ms to 100 ms (1 ms increments)
Monaural
Switches between stereo and monaural for Zone2 or Zone3 output.
Settings
Off
Produces stereo sounds in Zone2 or Zone3.
On
Produces monaural sounds in Zone2 or Zone3.
Enhancer
Enables/disables Compressed Music Enhancer (p.81) for Zone2 or Zone3 output.
Settings
Off
Disables Compressed Music Enhancer.
On
Enables Compressed Music Enhancer.
Tone Control
Adjusts the level of high-frequency range (Treble) and low-frequency range (Bass) for Zone2 or
Zone3 output.
Settings
Adjusts the levels of the high-frequency range (Treble) and low-frequency range
Auto
(Bass) automatically in synchronization with the main volume, with correction for
the auditory response of the human ear.
Adjusts the level of high-frequency range (Treble) and low-frequency range (Bass)
Manual
manually (-6.0 to +6.0 dB, 0.5 dB increments).
Does not adjust the level of high-frequency range (Treble) and low-frequency
Bypass
range (Bass).
Extra Bass
Enables/disables Extra Bass for Zone2 or Zone3 output. When Extra Bass is enabled, you can
enjoy enhanced bass sounds, regardless of the size of speakers.
Settings
Off
Disables Extra Bass.
On
Enables Extra Bass.
Left / Right Balance
Adjusts the front speaker balance for Zone2 or Zone3 output.
Setting range
-20 to 0 to +20 (negative to the left and positive to the right)
148
En
Advertisement
Table of Contents
