Updating The Unit's Firmware Via The Network; Updating The Unit's Firmware - Yamaha RX-V3085 Owner's Manual

MAIN 2 3 4 MAIN 2 3 4
SLEEP SLEEP ZONE ZONE
PARTY T T PARTY
PURE DIRECT PURE DIRECT HDMI OUT HDMI OUT
SCENE SCENE
1 1 2 2 3 3 4 4
5 5 6 6 7 7 8 8
INPUT INPUT
TUNER TUNER NET NET USB USB BLUETOOTH BLUETOOTH
PRESET PRESET
RED RED GREEN GREEN YELLOW YELLOW BLUE BLUE
SETUP
Cursor keys
ENTER
RETURN
TOP TOP POP-UP POP-UP
HOME HOME
MENU MENU / / MENU /MENU
AI AI
SUR. DECODE SUR. DECODE
PROGRAM PROGRAM VOLUME VOLUME
ENHANCER ENHANCER
STRAIGHT STRAIGHT
MEMORY MEMORY
TUNING TUNING BAND BAND TUNING TUNING

Updating the unit's firmware via the network

New firmware that provides additional features or product
improvements will be released as needed. If the unit is connected to the
Internet, you can download the firmware via the network and update it.
Note
• Do not operate the unit or disconnect the power cable or network cable
during firmware update. Firmware update takes about 20 minutes or more
(depending on your Internet connection speed).
• If the unit is connected to the wireless network, network update may not be
possible depending on the condition of the wireless connection. In this case,
update the firmware using the USB memory device (p.159).
• For details on update, visit the Yamaha website.
X
• The firmware update indicator (p.15) on the front display lights up when a firmware
update is available via the network.
• You can also update the firmware using the USB memory device from the "ADVANCED
SETUP" menu (p.159).
• You can also start the firmware update by pressing INFO on the front panel.
A firmware update is available if the following message is displayed after
SETUP is pressed.

Updating the unit's firmware

1
Read the on-screen description.
2
Use the cursor keys to select "START" and press ENTER.
The on-screen display turns off and the firmware update begins.
3
If "UPDATE SUCCESS PLEASE POWER OFF!" appears on
the front display, press MAIN ZONE z on the front panel.
The firmware update is complete.
X
• If you want to cancel without doing anything now, select "CLOSE".
• Firmware update takes about 20 minutes or more.
• You might not get the message or the lighting up firmware update indicator on the
front display depending on the condition of the network connection. In this case,
update the firmware using the USB memory device (p.159).
• For details on update, visit the Yamaha website.
• To perform the update when turning off the unit, select "LATER" in step 2, and then
follow the on-screen instructions. When a screen to confirm the firmware update
appears after turning off the unit, press ENTER to start the firmware update.
When the firmware update is complete, the unit enters standby mode automatically.
• To perform the update when turning off the unit, refer to the following instructions.
– The firmware update can be started by pressing INFO on the front panel.
– The unit turns off automatically without performing the firmware update if two
minutes pass after the screen to confirm the firmware update is displayed.
– To cancel the firmware update process, press RETURN, and the unit will turn off.
– The unit turns off without performing the firmware update if you turn off the unit
with AV CONTROLLER or MusicCast CONTROLLER.
160
En