Configuring The System Settings (Advanced Setup Menu); Advanced Setup Menu Items; Changing The Speaker Impedance Setting (Sp Imp.) - Yamaha RX-V871 Owner's Manual

Configuring the system settings
(ADVANCED SETUP menu)
You can configure the system settings of this unit using the front display.
1
Set this unit to standby mode.
2
While holding down STRAIGHT on the font panel, press MAIN ZONE
MAIN ZONE
PROGRAM STRAIGHT
3
Press PROGRAM to select an item.
4
Press STRAIGHT to select a setting.
5
Press MAIN ZONE to set this unit to standby mode and turn it on
again.
The new settings become effective.

ADVANCED SETUP menu items

Item Function
SP IMP. Changes the speaker impedance setting.
REMOTE ID Selects the remote control ID of the main unit.
Resets the Parental Lock code number for SIRIUS
SR LOCK
.
Satellite Radio.
TV FORMAT Switches the video signal type.
MON.CHK Removes the limitation on HDMI video output.
INIT Restores the default settings.
UPDATE Updates the firmware.
Checks the version of firmware currently installed on
VERSION
this unit.

Changing the speaker impedance setting (SP IMP.)

SP IMP. -8 MIN
Change the speaker impedance settings of unit depending on the impedance of the
speakers connected.
Settings
Select this when you connect 6-ohm speakers to this unit. You can also
6 Ω MIN
use 4-ohm speakers as the front speakers.
8 Ω MIN (default)
Select this when you connect 8-ohm or higher speakers to this unit.
Page
106
107
107
107
107
107
108
108
106
En