Yamaha RX-V3085 Owner's Manual page 137

Monaural Mix
Enables/disables monaural sound output. This setting is effective when "9ch Stereo" is
selected.
Settings
Off Disables monaural sound output.
On Enables monaural sound output.
Reset
Restores all default settings.
■ Dynamic Range
Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and DTS
signals) playback.
Settings
Maximum Produces audio without adjusting the dynamic range.
Standard Optimizes the dynamic range for regular home use.
Sets the dynamic range for clear sound even at night or at low volumes.
Minimum/Auto
When playing back Dolby TrueHD signals, the dynamic range is automatically
adjusted based on the input signal information.
■ Volume
Setting the volume.
Max Volume
Sets the limit value of the volume.
Setting range
-60.0 dB to +15.0 dB (5.0 dB increments), +16.5 dB [20.5 to 95.5 (5.0 increments), 97.0]
Initial Volume
Sets the initial volume when the receiver is turned on.
Settings
Off Sets the level to the volume level of the unit when it last entered standby mode.
Sets at Mute or the specified volume level (-80.0 dB to +16.5 dB, 0.5 dB increments)
[0.5 to 97.0 (0.5 increments)].
On
(Specify a volume level which is lower than the "Max Volume" setting.)
■ Pure Direct Mode
Selects whether to output video signals during the Pure Direct mode (p.81).
Settings
Automatically outputs video signals when any videos are input from the selected
Auto input source or an input source that can be operated with the on-screen display is
selected. When no video signals are input, the wall paper is displayed.
Video Off Does not output video signals including the wall paper.
■ Adaptive DSP Level
Selects whether to automatically adjust the CINEMA DSP effect level.
Settings
Off Does not adjust the effect level automatically.
Adjusts the effect level automatically according to the YPAO measurement results
On
and the volume level.
137
En