Connecting Audio Devices (Such As Cd Players) - Yamaha RX-V3085 Owner's Manual

Connecting audio devices (such as CD players)

Connect audio devices such as CD players and a turntable to the unit. Depending on the audio
output jacks available on your audio device, choose one of the following connections.
Y
• The following explanation is based on the assumption that you have not changed the "Input Assignment"
setting (p.150) in the "Setup" menu. As necessary, you can assign the COAXIAL (3, 4, 5) and OPTICAL (1, 2,
6) jacks to another input source.
• (RX-V3085 only)
Before connecting XLR balanced cables, refer to the instruction manual of your audio device and verify that its
XLR jacks are compatible with the pin assignments of the unit (p.42).
X
If you make more than one audio connection for one input source, an audio signal played back on the unit will be
determined according to the "Audio Select" setting (p.120) in the "Option" menu.
Audio output jacks on audio device
Digital coaxial
Digital optical
Analog stereo (RCA)
Analog stereo (XLR)
Turntable (PHONO)
Audio input jacks on the unit
AV 1-2 (COAXIAL)
AUDIO 3 (COAXIAL)
AV 3 (OPTICAL)
AUDIO 1-2 (OPTICAL)
AV 1–4 (AUDIO [RCA])
AUDIO 1–3 (AUDIO [RCA])
AUDIO 4 (AUDIO [XLR]) (RX-V3085 only)
PHONO
PHONO jacks
PHONO
L
L
R
R
The unit (rear)
GND
HDMI OUT
(HDCP2.2) AV 1
2 1
ARC (1 MOVIE) (5 STB)
AV 1 AV 2 AV 3 AV 4 COMPONENT VIDEO
(1 MOVIE) (5 STB) (6 GAME) Y P
B
VIDEO
Y P B
PHONO AUDIO 1 AUDIO 2 AUDIO 3
(7 TV) (3 MUSIC)
L ZONE OUT/PRE OUT
L
R R
ZONE 2/
1 2 3 4 6
GND OPTICAL OPTICAL COAXIAL COAXIAL 5 COAXIAL OPTICAL F.PRESENCE R.PRESENCE
R SURROUND
AUDIO 4 ANTENNA
R L (2 RADIO)
FM AM
75
Any of AV 1–4, AUDIO 1–4 (COAXIAL,
OPTICAL, AUDIO [RCA], AUDIO [XLR])
jacks
If you select the AV 1-4, AUDIO 1-4 or PHONO with the input key on the remote control, the
sound played on the audio device will be output from this unit.
* AUDIO 4 (AUDIO [XLR]) jack: RX-V3085 only
When connecting a turntable
• The PHONO jack of the unit is compatible with an MM cartridge. To connect a turntable with a
low-output MC cartridge, use a boosting transformer.
• Connecting the turntable to the GND terminal of the unit may reduce noise in the signal.
46
En
Audio output
(PHONO)
PHONO
L
L
R
R
Ground lead GND
AV 2 A
(6 G
P A
R
(
B
C C
P R
COAXIAL
O O
ZONE 3/
FRONT
OPTICAL
L
L
L L
R
R R
XLR
XLR
Audio output
(any of digital coaxial, digital optical,
analog stereo)
Turntable
Audio device