Page 1
English 中文 AV Receiver/ 收音扩音机 Easy Setup Guide 快速设置指南...
Page 2
This document explains how to set up a 9.1-channel system and play back surround sound from a BD/DVD on the unit. • The illustrations of the main unit and remote control used in this guide are of the RX-V3075, unless otherwise specified.
Placing speakers Set up the speakers in the room using the following diagram as a reference. For information on speaker systems other than 9.1-channel system, refer to “Owner’s Manual”. 0.5 to 1 m 0.5 to 1 m (1.6 to 3.3 ft) (1.6 to 3.3 ft) 1.8 m 1.8 m...
Connecting speakers/subwoofer • Under its default settings, the unit is configured for 8-ohm Connect the front speakers (1/2) Connect the surround speakers speakers. When connecting 6-ohm speakers, set the unit’s speaker impedance to “6 MIN”. For details, see “Setting the to the FRONT (//\) and the center (4/5) to the SURROUND (//\) speaker impedance”...
Page 5
Connect the surround back speakers Connect the front presence speakers Connect the subwoofer (9) to the (6/7) to the SURROUND BACK (E/R) to the EXTRA SP 1 (//\) SUBWOOFER PREOUT (1) jack. (//\) terminals. terminals. • Use a subwoofer equipped with built-in amplifier. ZONE OUT/PRE OUT PRE OUT ZONE OUT/PRE OUT...
Connecting external devices Connect external devices to the unit. a Connect a BD/DVD player to the unit with an HDMI cable. Audio out (digital optical or HDMI in HDMI out analog stereo) If the BD/DVD player is currently connected to the HDMI HDMI TV directly with an HDMI cable, disconnect the...
Connect the YPAO microphone to the YPAO MIC jack on the front panel. The Yamaha Parametric room Acoustic Optimizer (YPAO) function detects speaker connections, measures the The following screen appears on the TV. distances from them to your listening position(s), and then automatically optimizes the speaker settings, such as volume balance and acoustic parameters, to suit your room.
Page 8
If “W-1:Out of Phase” appears Use the cursor keys to select “Save/Cancel” and press ENTER. Follow the procedure below to check the speaker connections. Use the cursor keys to select “SAVE” and a Use the cursor keys to select “Result” and press ENTER. press ENTER.
Playing back a BD/DVD Many more features! Now let’s play back a BD/DVD. The unit has various other functions. Press AV 1 to select “AV 1” as the input We recommend playing back multichannel audio Please refer to “Owner’s Manual” on the supplied source.
Page 13
将后置环绕声音箱 (6/7) 连接至 将前现场感音箱 (E/R) 连接至 将低音炮 (9) 连接至 SUBWOOFER SURROUND BACK (//\) 端子。 EXTRA SP 1 (//\) 端子。 PREOUT (1) 插孔。 • 使用配有内置放大器的低音炮。 ZONE OUT/PRE OUT PRE OUT (SINGLE) (FRONT) ZONE OUT/PRE OUT PRE OUT (SINGLE) (FRONT) ZONE OUT/PRE OUT PRE OUT (SINGLE) (FRONT)
Page 17
播放 BD/DVD 更多功能! 现在让我们播放 BD/DVD 光盘。 本机还有众多其他功能。 按 AV 1 选择 “AV 1”作为输入源。 建议播放多声道音频 (5.1- 声道或更多)以感受本机产 请参考附带 CD 光盘上的 《使用说明书》以有效 生的环绕声。 SP IMP. - DOCK 地使用本机。 MUTE VOLUME STEREO TUNED PRE AMP PARTY ZONE ZONE ZONE A.Sel: Auto ADAPTIVE OUT 1 OUT 2 R PR ENHANCER...