Table of Contents
Advertisement
DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch Hardware Installation Guide
Area 3
Presents switch information based on your selection and the entry of configuration data.
Web Pages
When you connect to the management mode of the Switch with a web browser, a login window is displayed. Enter a
user name and password to access the Switch's management mode.
Below is a list and description of the main folders available in the web interface:
Configuration – A detailed discussion about configuring some of the basic functions of the Switch, accessing the
System information, Serial Port Settings, IP Address, Interface Settings, IPv6 Route Settings, IPv6 Neighbor
Settings, Port Configuration, Static ARP Settings, User Accounts, System Log Configuration, System Severity
Settings, DHCP Relay, Out of Band Management Settings, External Alarm Settings, DHCP Auto Configuration
Settings, MAC Address Aging Time, Web Settings, Telnet Settings, Password Encryption, Clipaging Settings,
Firmware Information, Dual Configuration Settings, Ping Test, Local Loopback Port Settings, VLAN Counter
Settings, SNTP Settings, MAC Notification Settings, SNMP Settings, Time Range Settings, sFlow, Single IP
Management and DDM.
L2 Features – A discussion of the Layer 2 features on the Switch, including Jumbo Frame, 802.1Q VLAN, Subnet
VLAN, QinQ, 802.1v Protocol VLAN, RSPAN Settings, GVRP Settings, GVRP Global Settings, MAC-based VLAN
Settings, PVID Auto Assign Settings, Port Trunking, LACP Port Settings, Traffic Segmentation, BPDU Tunneling
Settings, IGMP Snooping, MLD Snooping, Port Mirror, Loopback Detection Settings, Spanning Tree, Forwarding &
Filtering, LLDP, CFM and Ethernet OAM.
QoS – Features information on Switch QoS functions, including HOL Blocking Prevention, Bandwidth Control,
Traffic Control, 802.1P Default Priority, 802.1P User Priority, QoS Scheduling Mechanism, QoS Scheduling, In Band
Manage Settings and SRED.
Security – Features information on Switch security functions, including Safeguard Engine, Trusted Host, IP-MAC-
Port Binding, Port Security, DHCP Server Screening, 802.1X, SSL Settings, SSH, Access Authentication Control,
MAC-based Access Control, Web Authentication, and NetBIOS Filtering Settings.
ACL – Discussion on the ACL functions of the Switch, including ACL Configuration Wizard, Access Profile List, CPU
Access Profile List, ACL Finder, and ACL Flow Meter.
Monitoring – Features information about the monitoring functions on the Switch including, Cable Diagnostic, CPU
Utilization, Port Utilization, Packet Size, Memory Utilization, Packets, Errors, Port Access Control, Browse ARP
Table, Browse VLAN, IGMP Snooping, MLD Snooping, Browse Session Table, CFM, MAC Address Table, Browse
VLAN Counter Statistics, Ethernet OAM and Historical Counter & Utilization and System Log.
NOTICE: Any changes made to the Switch configuration during the current
session must be saved in the Save Changes web menu (explained below)
or use the command line interface (CLI) command save.
NOTE: Be sure to configure the user name and password in the User
Accounts window before connecting the Switch to the greater network.
24
Advertisement
Table of Contents
