Ip Http Exec-Timeout - D-Link DES-3010FA Cli Manual

ip http exec-timeout

The ip http exec-timeout global configuration command sets the interval in which the system waits for the user
input in http sessions before automatic logoff, use the ip http exec-timeout global configuration command. To
return to default, use the no form of this command.
Syntax
ip http exec-timeout minutes [seconds]
no ip http exec-timeout
Parameters
•
minutes - Integer that specifies the number of minutes.(Range: 1-65535)
•
seconds - Additional time intervals in seconds.(Range: 0-59)
Default Configuration
The default interval is 10 minutes.
Command Mode
Global Configuration mode
User Guidelines
This command also configures the exec-timeout for HTTPS in case the the HTTPS timeout was not set.
To specify no timeout, enter the ip https exec-timeout 0 0 command.
Page 320
Web Server