D-Link DES-3010FA Cli Manual page 201

The following table describes significant fields shown above:
Field
Dropped
Octets
Packets
Broadcast
Multicast
CRC Align Errors
Collisions
Undersize Pkts
Oversize Pkts
Fragments
Jabbers
64 Octets
65 to 127 Octets
128 to 255 Octets
256 to 511 Octets
512 to 1023 Octets
1024 to 1518 Octets
De scrip tio n
The total number of octets of data (including those in bad packets) received on the net-
work (excluding framing bits but including FCS octets).
The total number of packets (including bad packets, broadcast packets, and multicast
packets) received.
The total number of good packets received and directed to the broadcast address.
This does not include multicast packets.
The total number of good packets received and directed to a multicast address. This
number does not include packets directed to the broadcast address.
The total number of packets received with a length (excluding framing bits, but includ-
ing FCS octets) of between 64 and 1518 octets, inclusive, but with either a bad Frame
Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS
with a non-integral number of octets (Alignment Error).
The best estimate of the total number of collisions on this Ethernet segment.
The total number of packets received less than 64 octets long (excluding framing bits,
but including FCS octets) and otherwise well formed.
The total number of packets received longer than 1518 octets (excluding framing bits,
but including FCS octets) and otherwise well formed.
The total number of packets received less than 64 octets in length (excluding framing
bits but including FCS octets) and either a bad Frame Check Sequence (FCS) with an
integral number of octets (FCS Error) or a bad FCS with a non-integral number of
octets (Alignment Error).
The total number of packets received longer than 1518 octets (excluding framing bits,
but including FCS octets), and either a bad Frame Check Sequence (FCS) with an
integral number of octets (FCS Error) or a bad FCS with a non-integral number of
octets (Alignment Error).
The total number of packets (including bad packets) received that are 64 octets in
length (excluding framing bits but including FCS octets).
The total number of packets (including bad packets) received that are between 65 and
127 octets in length inclusive (excluding framing bits but including FCS octets).
The total number of packets (including bad packets) received that are between 128
and 255 octets in length inclusive (excluding framing bits but including FCS octets).
The total number of packets (including bad packets) received that are between 256
and 511 octets in length inclusive (excluding framing bits but including FCS octets).
The total number of packets (including bad packets) received that are between 512
and 1023 octets in length inclusive (excluding framing bits but including FCS octets).
The total number of packets (including bad packets) received that are between 1024
and 1518 octets in length inclusive (excluding framing bits but including FCS octets).
Page 200
RMON Commands