Traffic-Shape - D-Link DES-3010FA Cli Manual

D-Link DES-3010FA/GA/PA CLI Reference Guide

traffic-shape

The traffic-shape Interface configuration (Ethernet, Port-Channel) mode command activates the traffic shaper on
egress ports or egress queues. Use the no form of this command to disable the shaper.
Syntax
traffic-shape { committed-rate } [queue-id]
no traffic-shape [queue-id]
Parameters
•
committed-rate – The average traffic rate (CIR) in bits per second(bps). Range:64-256000
•
queue-id – [optional] Assign shaper to the specified queue. Range:4096-16769020
•
no traffic-shape – disable the shaper on the interface, or use queue-id to disable the shaper on the specified
queue.
Command Mode
Interface configuration (Ethernet, Port-Channel).
Usage guidelines
Use this command in interface configuration mode to activate the shaper on egress port or egress queue.
For egress port, enter the interface configuration mode with the port number, and use traffic-shape without the
queue-id option; the CIR is applied on the specified port.
To activate shaper for specific queue, add the queue id to the line.
Default value
No shape is defined.
Page 177