Snmp-Server V3-Host - D-Link DES-3010FA Cli Manual

snmp-server v3-host

The snmp-server v3-host Global Configuration mode command specifies the recipient of Simple Network Man-
agement Protocol Version 3 notifications. To remove the specified host, use the no form of this command.
Syntax
snmp-server v3-host {ip-address | hostname} username [traps | informs] {noauth | auth | priv} [udp-port port]
[filter filtername] [timeout seconds] [retries retries]
no snmp-server host {ip-address | hostname} username [traps | informs]
Parameters
•
ip-address—Specifies the IP address of the host (targeted recipient).
•
hostname—Specifies the name of the host. (Range:1-158 characters)
•
username—Specifies the name of the user to use to generate the notification. (Range: 1-24)
•
traps—Indicates that SNMP traps are sent to this host.
•
informs—Indicates that SNMP informs are sent to this host.
•
noauth—Indicates no authentication of a packet.
•
auth—Indicates authentication of a packet without encrypting it.
•
priv—Indicates authentication of a packet with encryption.
•
port—Specifies the UDP port of the host to use. If unspecified, the default UDP port number is 162.
(Range: 1-65535)
•
filtername—Specifies a string that defines the filter for this host. If unspecified, nothing is filtered.
(Range: 1-30 characters)
•
seconds—Specifies the number of seconds to wait for an acknowledgment before resending informs. If
unspecified, the default timeout period is 15 seconds. (Range: 1-300)
•
retries—Specifies the maximum number of times to resend an inform request. If unspecified, the default max-
imum number of retries is 3. (Range: 0-255)
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
A user and notification view are not automatically created. Use the snmp-server user, snmp-server group and
snmp-server view Global Configuration mode commands to generate a user, group and notify group, respec-
tively.
Example
The following example configures an SNMPv3 host.
Console(config)# snmp-server v3-host 10.1.1.1 1 traps noauth timeout 20
Page 226
SNMP Commands