Show Dot1X Users - D-Link DES-3010FA Cli Manual

show dot1x users

The show dot1x users Privileged or User EXEC mode command displays active 802.1X authenticated users for
the device.
Syntax
show dot1x users [username username]
Parameters
•
username — Supplicant username (Range: 1-160 characters)
Default Configuration
This command has no default configuration.
Command Mode
Privileged or User EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays 802.1X users.
Console# show dot1x users
Port Username
----- --------
1 Bob
2 John
Console# show dot1x users username Bob
Username: Bob
Port Username
----- --------
1 Bob
Session Time Auth Method
------------ -----------
1d:03:08.58 Remote
08:19:17 None
Session Time Auth Method
------------ -----------
1d:03:08.58 Remote
Page 344
802.1x Commands
MAC Address
--------------
0008:3b79:8787
0008:3b89:3127
MAC Address
--------------
0008:3b79:8787