D-Link DES-3010FA/GA/PA CLI Reference Guide
management logging
The management logging global configuration command enables logging management access list (ACL) events.
To disable logging management access list events, use the no form of this command.
Syntax
management logging deny
no management logging deny
Parameters
•
deny — Indicates logging messages related to deny actions of management ACLs.
Default Configuration
Logging management ACL events is enabled.
Command Mode
Global Configuration mode
User Guidelines
Other types of management ACL events are not subject to this command.
Example
The following example enables logging messages related to deny actions of management ACLs.
Console(config)# management logging deny
Page 277