D-Link DES-3010FA Cli Manual page 343

Port Admin Mode
---- ----------
3 Auto
Quiet period: 60 Seconds
Tx period:30 Seconds
Max req: 2
Supplicant timeout: 30 Seconds
Server timeout: 30 Seconds
Session Time (HH:MM:SS): 08:19:17
MAC Address: 00:08:78:32:98:78
Authentication Method: Remote
Termination Cause: Supplicant logoff
Authenticator State Machine
State: HELD
Backend State Machine
State: IDLE
Authentication success: 9
Authentication fails: 1
The following table describes significant fields shown above:
Field
Port
Admin mode
Oper mode
Reauth Control
Reauth Period
Username
Quiet period
Tx period
Oper Mode Reauth
Control
--------- -------
Unauthorized Ena
Description
The port number.
The port admin mode. Possible values: Force-auth, Force-unauth, Auto.
The port oper mode. Possible values: Authorized, Unauthorized or Down.
Reauthentication control.
Reauthentication period.
The username representing the identity of the Supplicant. This field shows the
username in case the port control is auto. If the port is Authorized, it shows the
username of the current user. If the port is unauthorized it shows the last user
that was authenticated successfully.
The number of seconds that the device remains in the quiet state following a
failed authentication exchange (for example, the client provided an invalid pass-
word).
The number of seconds that the device waits for a response to an Extensible
Authentication Protocol (EAP)-request/identity frame from the client before
resending the request.
Page 342
802.1x Commands
Reauth Username
Period
------ --------
3600 Clark