Private-Vlan Primary - D-Link DES-3010FA Cli Manual

D-Link DES-3010FA/GA/PA CLI Reference Guide

private-vlan primary

The private-vlan primary Interface Configuration (VLAN) mode command configures the primary PVLAN. To
return to the default configuration, use the no form of this command.
Syntax
private-vlan primary
no private-vlan primary
Default Configuration
No PVLANs are configured.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
•
An IP interface cannot be defined on a primary VLAN.
•
A primary VLAN cannot be defined if an IP interface has been configured on it.
•
The command is not supported under the command interface range vlan.
Example
This example configures VLAN 200 as the primary private VLAN.
Console# config
Console(config)# vlan database
Console(config-vlan)# vlan 200
Console(config-vlan)# exit
Console(config)# interface vlan 200
Console(config-if)# private-vlan primary
Page 299