Switchport General Acceptable-Frame-Type Tagged-Only - D-Link DES-3010FA Cli Manual
Layer 2 switch, 8 port 10/100 802.3af poe managed switch plus (1)gigabit copper and (1)sfp interface
Hide thumbs
Also See for DES-3010FA:
- Cli manual (348 pages) ,
- Web user manual (281 pages) ,
- Manual (348 pages)
Table of Contents
Advertisement
D-Link DES-3010FA/GA/PA CLI Reference Guide
switchport general acceptable-frame-type tagged-only
The switchport general acceptable-frame-type tagged-only Interface Configuration mode command discards
untagged frames at ingress. To return to the default configuration, use the no form of this command.
Syntax
switchport general acceptable-frame-type tagged-only
no switchport general acceptable-frame-type tagged-only
Default Configuration
All frame types are accepted at ingress.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
User Guidelines
There are no user guidelines for this command.
Example
The following example configures Ethernet port 6 to discard untagged frames at ingress.
Console(config)# interface ethernet 6
Console(config-if)# switchport mode general
Console(config-if)# switchport general acceptable-frame-type tagged-only
Page 311
Hide quick links:
Advertisement
Table of Contents
