History Size - D-Link DES-3010FA Cli Manual

D-Link DES-3010FA/GA/PA CLI Reference Guide

history size

The history size Line Configuration mode command configures the command history buffer size for a particular
line. To reset the command history buffer size to the default configuration, use the no form of this command.
Syntax
history size number-of-commands
no history size
Parameters
•
number-of-commands—Number of commands that the system records in its history buffer. (Range: 10 - 200)
Default Configuration
The default history buffer size is 10.
Command Mode
Line Configuration mode
User Guidelines
This command configures the command history buffer size for a particular line. To configure the command history
buffer size for the current terminal session, use the terminal history size User EXEC mode command.
Example
The following example changes the command history buffer size to 100 entries for a particular line.
Console (config) # line telnet
Console(config-line)# history size 100
Page 139