D-Link DES-3010FA/GA/PA CLI Reference Guide
private-vlan community
The private-vlan community Interface Configuration (VLAN)mode command associates the primary VLAN with
the community VLANs.
Syntax
private-vlan community {add community-vlan-list | remove community-vlan-list }
Parameters
•
add community-vlan-list — Specifies a list of community VLAN IDs to be associated. Separate nonconsecu-
tive VLAN IDs with a comma and no spaces; a hyphen designates a range of IDs.
•
remove community-vlan-list — Specifies a list of community VLAN IDs to be removed. Separate noncon-
secutive VLAN IDs with a comma and no spaces; a hyphen designates a range of IDs.
Default Configuration
No association is configured.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
•
This command creates a community VLAN and associates it with the primary VLAN.
•
The command is executed in the context of the primary VLAN.
•
A community VLAN can only be associated with one primary VLAN.
•
A VLAN that has been configured as a community VLAN cannot be configured as a primary or isolated VLAN.
•
The command is not supported under the command interface range vlan.
Example
This example associates primary private VLAN 200 with community private VLAN 2.
Console# config
Console(config)# vlan database
Console(config-vlan)# vlan 200
Console(config-vlan)# exit
Console(config)# interface vlan 200
Console(config-if)# private-vlan community add 2
Page 301