Sntp Unicast Client Enable - D-Link DES-3010FA Cli Manual
Layer 2 switch, 8 port 10/100 802.3af poe managed switch plus (1)gigabit copper and (1)sfp interface
Hide thumbs
Also See for DES-3010FA:
- Cli manual (348 pages) ,
- Web user manual (281 pages) ,
- Manual (348 pages)
Table of Contents
Advertisement
D-Link DES-3010FA/GA/PA CLI Reference Guide
sntp unicast client enable
The sntp unicast client enable Global Configuration mode command enables the device to use the Simple Net-
work Time Protocol (SNTP) to request and accept SNTP traffic from servers. To disable requesting and accepting
SNTP traffic from servers, use the no form of this command.
Syntax
sntp unicast client enable
no sntp unicast client enable
Default Configuration
The SNTP unicast client is disabled.
Command Mode
Global Configuration mode
User Guidelines
Use the sntp server Global Configuration mode command to define SNTP servers.
Examples
The following example enables the device to use the Simple Network Time Protocol (SNTP) to request and accept
SNTP traffic from servers.
Console(config)# sntp unicast client enable
Page 59
Hide quick links:
Advertisement
Table of Contents
