Section 10. Lacp Commands; Lacp System-Priority - D-Link DES-3010FA Cli Manual
Layer 2 switch, 8 port 10/100 802.3af poe managed switch plus (1)gigabit copper and (1)sfp interface
Hide thumbs
Also See for DES-3010FA:
- Cli manual (348 pages) ,
- Web user manual (281 pages) ,
- Manual (348 pages)
Table of Contents
Advertisement
D-Link DES-3010FA/GA/PA CLI Reference Guide
Section 10. LACP Commands
lacp system-priority
The lacp system-priority Global Configuration mode command configures the system priority. To return to the
default configuration, use the no form of this command.
Syntax
lacp system-priority value
no lacp system-priority
Parameters
•
value — Specifies system priority value. (Range: 1 - 65535)
Default Configuration
The default system priority is 1.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example configures the system priority to 120.
Console(config)# lacp system-priority 120
Page 129
Hide quick links:
Advertisement
Table of Contents
