BT 2000 User Manual page 79

Pull the control panel up and forward.
Remove the old image drum unit (with its toner
cartridge), wrap it in the packaging from the new
image drum unit and dispose of safely.
Remove the protective sheet from your new
image drum unit.
Insert the new unit into your machine. Make sure
that the tabs on both sides of the drum slot in as
shown. Then press down firmly on both ends until
it clicks into place.
Install a new toner cartridge (see 'Replacing Toner
Cartridge', page 73) and close the top cover and
control panel.
Wait for the display to show the current time and
answering mode.
Press
Press
Display shows
Press to reset the drum unit counter
to zero.
Press
standby.
.
.
to return to
76