BT 2000 User Manual page 27

Insert the document to be faxed face down
into the document feeder tray.
Press .
Use the keypad, One Touch or Auto Dial to
call the number you want.
When the far end machine responds, press
to send your fax.
Your eF@x 2000 is pre-set to scan
documents into memory before sending.
You can change this so that documents are
held in the feeder tray. This is useful if you
want to use the voice request feature. (See
'To send a voice request' on page 28.)
The FEED setting of 17:MEM./FEEDER SW.
only becomes effective if user function
25:INSTANT DIALLING is set to OFF.
If 25:INSTANT DIALLING is set to ON, all
documents are scanned when you start dialling.
Press
Press .
Display shows
Press .
Display shows
If the line is busy or if there is no answer, your fax
will automatically try to redial the number every
three minutes and up to 5 times.
.
If you have an alternate number programmed for
the person you are calling then, if the first attempt
fails, your eF@x 2000 will automatically try the
alternate number at the next attempt.
Enter .Display shows
Press to switch between MEM for
storing documents in the memory and
FEED for sending from the feeder tray.
Press until the display shows
Press . Display shows
Press to confirm.
Press
standby.
Press . The last number called is
displayed.
Press to call the number.
to return to
24