BT 2000 User Manual page 70

outside line before dialling the rest of the number.
See 'Connecting to a switchboard', page 15.
Original setting = OFF.
When switched On, your eF@x 2000 automatically
begins dialling as soon as you press a
button or enter an
switched Off, you have to press the
order to begin dialling. Original setting = OFF.
When connected to a switchboard, this function lets
you enter the number your machine has to dial in
order to get an outside line. See 'Connecting to a
switchboard', page 15. Original setting = OFF.
There are further options which can be changed with
the assistance of the Helpdesk
These are:
You can set how many times your eF@x 2000
automatically tries to redial a number which is busy
or does not answer. Original setting = 5.
You can set the interval between each redial attempt.
Original setting = 3 MINS.
Allows your machine to wait for and detect a dial
tone before dialling. Original setting = ON.
Allows your machine to detect a busy tone when
sending a fax. Original setting = ON.
Sets the rate of pulse dialling.
Original setting = 10 PPS.
67
number. When
button in
.
Original setting = 33%.
Controls the type of pulse dialling used.
Original setting = N.
Sets the duration of tones used for dialling.
Original settings = 85ms.
If connected to a switchboard, you may need to reset
your machine to suit your switchboard's line –
normal (N), flash (F) or earth (E).
Original setting = NORMAL.