BT 2000 User Manual page 26

Insert the document to be faxed face down
into the document feeder tray. Display
shows
Dial the number. If you make a mistake
press
number.
Press
Insert the document to be faxed face down
into the document feeder tray.
Lift the handset.
From the telephone keypad, dial the
number. If the receiving fax is in automatic
reception mode you will hear the fax tones.
If a person answers, ask them to press the
button on their machine.
Press
the handset.
When you send a fax, the display keeps you up
to date with progress.
– the number is being dialled.
– the line is ringing.
23
.
to go back and re-enter the
to dial and send the fax.
to send your fax then replace
– the name (or number) programmed
into the far end machine is displayed.
– The fax is being sent. XXX is the
speed that data is being sent.
– the fax has been sent successfully.
– if you see this or another error
message a problem occurred during sending.
Try resending the fax.
You can scroll through the
entries.
Press repeatedly to display the
stored names in alphabetical order.
Press .
Use the keypad to enter the first letter of
the name you have stored.
Repeated presses of that key will display all
the entries starting with those letters. For
example, repeated presses of the
will display all names starting with , then
all names starting with , then all names
starting with .
Numbers stored without names are not displayed.
To store numbers in memory see 'One touch buttons',
page 29 and 'Auto Dial directory', page 31.
and
button