BT 2000 User Manual page 29

You can set your machine to receive faxes
only from numbers that are stored in the
One Touch or Auto Dial memories (or that
have the same last 4 digits as stored
numbers). Additionally, you can also prevent
dialling to any numbers except those stored
in the memory.
Press
Press .
Display shows
Press . Display shows
Press .
0
Press . Display shows
TUV
8
and the current setting.
= restrict faxes received.
= restrict faxes sent and received
= no restrictions.
Press until the setting you want is
displayed.
Press to confirm.
Press
standby.
• All documents scanned into the memory are lost.
• All faxes received into the memory are lost.
• Dialling and transmitting settings for documents
Your eF@x 2000 will print a report informing you of
a power failure. The report will show details of the
faxes (incoming and outgoing) that you have lost and
which may need to be resent. See 'Printouts and
Reports', page 48.
.
In order to give you maximum efficiency, you can load
and prepare documents for faxing while your machine
is sending or receiving another message or printing.
After your eF@x 2000 has finished scanning a
document into the memory and is transmitting from
memory, you can:
• Store another document in the memory and
prepare to send it.
• Continue to store other documents in the memory
so long as you have enough memory free.
• Make copies of documents.
to return to
You can:
• Load another document into the memory and
prepare to send it.
• Continue to store other documents in the memory
so long as you have enough memory free.
• Continue to receive faxes while earlier messages
are being printed (providing your machine is set
to memory reception mode).
loaded into the document feeder are lost.
26