BT 2000 User Manual page 63

You can set the volume for the secondary ringing tone
your hear when your machine is set to
. It also adjusts the volume of the alarm tone
your machine produces. Original setting = HIGH.
You can set your machine only to send and/or
receive faxes from numbers stored in the One Touch
and Auto Dial directories.
If you do not want you machine to send faxes or
receive faxes from other numbers, select T/R. if you
only want you machine to refuse faxes from other
numbers, select RX. Original setting = OFF.
You can change the default resolution and contrast
settings for sending faxes and copying documents.
Original settings = STANDARD and NORMAL.
When set to telephone/fax answering mode your
machine automatically distinguishes between
incoming voice and fax calls. If it is a voice call, your
machine tells you to pick up the handset connected
to the TAD socket. If you do not answer, the machine
automatically switches to fax mode to enable the caller
to send a fax. The T/F TIMER function sets how long
your machine waits for you to answer the call before
switching back to fax mode. Original setting = 20 SECS.
This sets how long your machine waits before
answering an incoming call when it is set to Auto or
Telephone/Fax answering modes.
Original setting = 1 RING.
If your machine is set to Telephone/Fax mode, the
recommended setting is 1 ring.
Distinctive ringing is a service offered by BT and
other networks that allows you to have two telephone
numbers on the same line, each with its own
distinctive ring. This enables you to separate calls,
for example, into business and personal. If you have
distinctive ringing you will need to adjust this function.
See 'To set distinctive ringing', page 63. For more
information contact BT or your network.
Original setting = OFF.
You can set what size paper you are using in the
paper tray of your machine so that it prints out on
the correct area. Original setting = A4.
You can switch between the two languages, English
or French, used for the display. Original setting =
ENGLISH.
You can set the type of ring you hear for incoming
calls. When set to Off, your machine will not ring for
incoming calls. When switched On, you machine only
rings when set to Manual receive mode or when
is set to 5-20 seconds (except 1 ring).
When set to DRC, you machine rings for each
incoming call with the same tone, even if you have
switched on. Original setting = ON.
60