BT 2000 User Manual page 16

Before connecting power, ensure that the power switch
is OFF (The side nearest 0 is down).
Plug one end of the telephone line cord into the
LINE socket at the back of the machine.
Plug the other end into the telephone wall socket.
Plug the mains power cable into the socket on the
back of the machine and the other end into a mains
power socket.
Switch your eF@x 2000 on using the On/Off switch.
Display shows the time and reception mode.
Your machine is now in standby, ready to send
and receive faxes.
13
If you want to connect an answering machine you
must set the reception mode of your eF@x 2000 to
TAD/FAX AUTO SW MODE in order for the
answering machine to work. See page 22.
• Plug the TAD adaptor lead into the TEL 1 socket
at the back of the machine.
• Plug the answering machine (or telephone) line
cord into the TAD adaptor socket.
To connect both an answering machine and a
telephone, first connect your answering machine to the
eF@x 2000 and then insert the telephone cable into
the telephone socket on the answering machine