Equipment Settings - CARDIOSTRONG CST-TR20-2 Assembly And Operating Instructions Manual

4.4

Equipment settings

Information on the
Personal settings
display
Hold MODE/ENTER and then press SPEED up in order to
get to the technical mode. The first display shows the
100 Eng
software version. Then press MODE/ENTER to get to the
MODE
next display for personal settings or to show the factory
settings.
Metric (Si) or English (EN) measurements. Press SPEED
up or down in order to change. Press MODE/ENTER to En or Si
accept the setting and go to the next display.
Set break times. Set the duration for which the treadmill
can be stopped until it is automatically reset. You can
choose between 90, 180 or 300 seconds before the PT
console resets. Press SPEED up or down to change this. 90 or 180 or 300
Press MODE/ENTER to accept the setting and go to the
next display.
Turn on and off acoustic alarm WARNING: The acoustic
alarm was set by the manufacturer in order to warn bz
users when the treadmill starts or the speed changes. ON or OFF
The user may turn off the alarm at their own risk.
Set the beginning speed of the treadmill after the pause
button was pressed: 0 indicates that the treadmill will
start at the lowest speed. 1 indicates that the treadmill
init
will start at the speed at which the treadmill was set
0 or 1
before the pause button was pressed. Press SPEED up
or down to change this. Press MODE/ENTER to accept
the entry and go to the next display.
TR20
34