Equipment Settings - CARDIOSTRONG TR70i Assembly And Operating Instructions Manual

4.4

Equipment settings

Personal settings
Hold MODE/ENTER and then press SPEED up in order to
get to the technical mode. The first display shows the
software version. Then press MODE/ENTER to get to the
next display for personal settings or to show the factory
settings.
Metric (Si) or English (EN) measurements. Press SPEED
up or down in order to change. Press MODE/ENTER to
accept the setting and go to the next display.
Set break times. Set the duration for which the treadmill
can be stopped until it is automatically reset. You can
choose between 90, 180 or 300 seconds before the
console resets. Press SPEED up or down to change this.
Press MODE/ENTER to accept the setting and go to the
next display.
Turn on and off acoustic alarm WARNING: The acoustic
alarm was set by the manufacturer in order to warn
users when the treadmill starts or the speed changes.
The user may turn off the alarm at their own risk.
Set the beginning speed of the treadmill after the pause
button was pressed: 0 indicates that the treadmill will
start at the lowest speed. 1 indicates that the treadmill
will start at the speed at which the treadmill was set
before the pause button was pressed. Press SPEED up
or down to change this. Press MODE/ENTER to accept
the entry and go to the next display.
34
Information on the
display
100 Eng
MODE
En or Si
PT
90 or 180 or 300
bz
ON or OFF
init
0 or 1
TR70i