CARDIOSTRONG CST-TR20-2 Assembly And Operating Instructions Manual page 24

Unfolding the treadmill
1. Make sure there is enough
space to set up the treadmill:
at least 1 m on both sides and
to the front and at least 2 m
behind the equipment for
safety reasons. If the user starts
to fall, there is enough space to
leave the treadmill.
2. Make sure that nothing is
standing next to or on top
of the treadmill that can be
spilled or thrown or that makes
it impossible to unfold the
treadmill.
3. Stand behind the treadmill.
Press the equipment slightly forward towards the display and slightly press the upper
part of the hydraulic brake forward with your left foot until the lock releases and the
treadmill can be pulled backward.
4. The hydraulic brake will slowly lower independently. You should still hold on to the
treadmill until it has lowered 2/3 of the way. Pay attention to an appropriate lifting
technique, bend your knees and keep your back straight.
Horizontal alignment
If the floor is uneven, you can stabilize the treadmill by turning the two setting screws
under the main frame.
1. Lift the treadmill on the desired side and rotate the setting screws under the main
frame.
2. Rotate the screws clockwise in
order to remove them and to raise the
running surface.
3. Rotate them counterclockwise in
order to lower the running surface.
Down
Up
TR20
24