Errors And Error Diagnosis - CARDIOSTRONG CST-TR20-2 Assembly And Operating Instructions Manual

+ In order to be able to guarantee the constructively defined safety level of this
equipment, we recommend having the equipment regularly maintained (at least
once a year) by specialists (contract partner service technicians).
+ The equipment may be cleaned of dust, dirt and sweat using a damp cloth. The
use of solvents should be strictly avoided. Also, make sure that no liquids (e. g.
sweat) get into the openings of the equipment (e. g. console).
2.2

Errors and error diagnosis

The equipment runs through regular quality controls during production. Nevertheless,
errors or malfunctions on the equipment may occur. Individual parts are often the
cause of faults and replacement is usually sufficient. Please use the following overview
to see the six most common errors and how to repair them. If the equipment still does
not work properly, please contact your contract partner.
Error
Console only
shows lines
Running belt tilted
Running belt slips
through/stops
Scraping noises
Display does not
show anything
No pulse display
Cause
Safety key missing
Running belt not
aligned
Belt tension/lubrication
not ok
Running belt scrapes,
because it is not aligned
Check plug connections
(cables)
Sources of interference
in the room
With chest strap
Unsuitable chest strap
Position of the chest
strap incorrect
Batteries empty
Repair
Check if the safety key is inserted
and place it in
Align running belt in accordance
with the instructions
Check belt tension/lubrication in
accordance with the instructions
Align running belt in accordance
with the instructions
Mains switch on "on", make sure
that the safety key is inserted
Remove sources of interference (e.
g. mobile phone, speakers, etc.)
Use suitable chest strap (see
recommended accessories)
Reposition chest strap and/or
moisten electrodes
Change batteries
11