Equipment Settings - CARDIOSTRONG TR20 Assembly And Operating Instructions Manual

3.4

Equipment settings

Personal settings
Hold MODE/ENTER and then press SPEED up in order to get to
the technical mode. The first display shows the software version.
Then press MODE/ENTER to get to the next display for personal
settings or to show the factory settings.
Metric (Si) or English (EN) measurements. Press SPEED up or
down in order to change. Press MODE/ENTER to accept the
setting and go to the next display.
Set break times. Set the duration for which the treadmill can be
stopped until it is automatically reset. You can choose between
90, 180 or 300 seconds before the console resets. Press SPEED up
or down to change this. Press MODE/ENTER to accept the setting
and go to the next display.
Turn on and off acoustic alarm WARNING: The acoustic alarm
was set by the manufacturer in order to warn users when the
treadmill starts or the speed changes. The user may turn off the
alarm at their own risk.
Set the beginning speed of the treadmill after the pause button
was pressed: 0 indicates that the treadmill will start at the lowest
speed. 1 indicates that the treadmill will start at the speed
at which the treadmill was set before the pause button was
pressed. Press SPEED up or down to change this. Press MODE/
ENTER to accept the entry and go to the next display.
28
Information on
display
100 Eng
MODE
En or Si
PT
90 or 180 or 300
bz
ON or OFF
init
0 or 1
TR20
the