User Settings - CARDIOSTRONG TX40e Assembly And Operating Instructions Manual

Set the HRC type: There are two modes of HRC programmes, HRC1 – constant and HRC2- interval. Set
the preferred HRC mode with the buttons.
Set the mode: Set the speed or the incline with the buttons.
Set the age: Enter your age with the buttons.
Set the target heart rate: Enter your target heart rate with the buttons.
Set the target time: Set the programme duration of your training with the buttons.
WARNING: The heart rate measuring can be imprecise. Any overexertion can cause serious injuries.
When you feel weak or uncomfortable, stop the training immediately.
4.4

User settings

In the user settings you can change the screen brightness or the language settings, for instance.
Choose SAVE after your selection and press ENTER.
Symbols are displayed at the top right of the screen. When a USB stick is plugged
in, the USB symbol is displayed here; in addition, the maintenance symbol is dis-
played here every 300 km to remind you to do a little service.
Set the screen brightness
Language selection as well as units (metric or imperial)
Development environment (only to be used by the service technician)
34
TX40e