System Customizations; Headset Use - Yealink SIP-T46S User Manual

User Guide for the SIP-T46S IP Phone
The entries in the enabled search source lists whose name or phone number matches the
characters entered will appear on the LCD screen. You can press
the desired entry and then place a call to the entry.

System Customizations

Headset Use

If you want to use a wired headset, physically connect your headset to the phone and activate
the headset mode for use. For more information on physically connecting a headset, refer to
Phone Installation
If you want to use a wireless headset, insert the Bluetooth
back of the IP phone. For more information on using a Bluetooth headset, refer to
on page 84.
provides an introduction to wired headset use.
This section
If both a Bluetooth headset and a wired headset are connected, only the Bluetooth headset can
Note
be used.
To use headset, make sure the headset mode is enabled. Contact your system administrator for
more information.
Headset Mode Activation/Deactivation
To activate the headset mode:
Press
1.
The HEADSET key LED illuminates solid green and the headset icon
screen.
Press the line key or the Answer soft key to answer an incoming call. The call will be
connected to your headset automatically.
Enter the desired number and then press the Send soft key, the phone will then place a call
using the headset automatically. For more information on using the headset to place a call,
refer to Placing Calls
82
on page 20.
on the phone.
on page 115.
or to scroll to
USB dongle into the USB port at the
Bluetooth Headset
appears on the idle