Anonymous Call - Yealink SIP-T46S User Manual

User Guide for the SIP-T46S IP Phone
You can also configure a DSS key as a group pickup key via phone user interface or web user
interface. Once configured, you can pick up a call by pressing the group pickup key directly. For
more information, refer to
Note The direct call pickup code and group call pickup code are predefined on the system server.
Contact your system administrator for more information.
The call pickup code configured on a per-line basis takes precedence over that configured on a
global basis.

Anonymous Call

You can use anonymous call to block your identify and phone number from appearing to the
called party when you call someone. For example, you want to call to consult some of the
services, but don't want to be harassed. Anonymous call is configurable on a per-line basis. You
can also configure the phone to send anonymous call on/off code to the server to
activate/deactivate anonymous call on the server side.
Note
Anonymous call is not available on all servers. Contact your system administrator for the
anonymous call on code and off code.
To configure anonymous call via phone user interface:
Press Menu->Features->Anonymous.
1.
Select the desired line and then press the Enter soft key.
2.
Press
3.
field.
(Optional.) Press
4.
Send Anony Code field.
The phone will send the configured on code or off code depending on your selection when
you enable or disable anonymous call feature on the phone.
(Optional.) Enter the anonymous call on code and off code respectively in the On Code and
5.
Off Code field.
158
DSS Keys on page 89.
or , or the Switch soft key to select Enabled from the Local Anonymous
or , or the Switch soft key to select the desired value from the