System Customizations; Headset Use - Yealink SIP-T48G User Manual

6. Tap OK to confirm the deletion or Cancel to cancel.

System Customizations

Headset Use

If you want to use a wired headset, physically connect your headset to the phone and activate the headset mode
for use.
If you want to use a wireless headset, insert the Bluetooth USB dongle BT40 into the USB port on the back of the
phone.
This section provides an introduction to wired headset use.
Note If both a Bluetooth headset and a wired headset are connected, only the Bluetooth headset
can be used.
Headset Mode Activation/Deactivation
To activate the headset mode:
1. Press on the phone.
The HEADSET key LED illuminates solid green, and the icon
screen when the headset mode is activated. When you tap the line key or the Answer soft key to answer
an incoming call, the call is connected to your headset automatically
With the handset on-hook, enter the desired number and tap Send, the
phone will then place a call using the headset automatically.
User Guide for the SIP-T48G IP Phone
appears on the status bar of the touch
51