Do you have a question about the SIP-T46S and is the answer not in the manual?
Questions and answers
Becky
May 5, 2025
Is there a preset voice mail code? We were told out code didn't change, but it doesn't work to retrieve messages on this new phone
1 comments:
Mr. Anderson
May 18, 2025
The Yealink SIP-T46S does not have a preset voicemail code. You need to configure the voicemail access code manually or use the system code *1 to access voicemail.
This answer is automatically generated
Mahesh
January 16, 2025
Hi, when my colleague's Landline phone rings (In the same office as mine) and the colleague is not on her desk, how do I answer the call from my landline phone (So that I don't have to get up and go to my colleague's desk). In other office that I worked it's call pulling a call. Please suggest.
1 comments:
Mr. Anderson
February 3, 2025
To answer a call on your Yealink SIP-T46S phone when your colleague's phone rings, you can use the call pickup feature if it is configured in your phone system. Contact your system administrator to ensure the feature is enabled and to obtain the specific code for call pickup. Typically, you would dial the call pickup code (e.g., *97 or another defined code) followed by your colleague's extension to answer the call.
This answer is automatically generated
sue
June 18, 2025
I want to change the name and number of my speed dial settings.
When i press who is there currently I get a menu saying " 1. Type BLF List" 2. Account ID Line1" but not option to change the name or phone number
Press: or the End Call soft key. pressing the Headset key, Speakerphone key or by picking up the handset. Headset mode requires a connected headset. Using the headset: Press the End Call soft key. Yealink SIP-T46S Quick Reference Guide...
If there is more than one call on hold, 3. Press the Tran soft key when the press to select the second party answers. desired call, and then press the Resume soft key. Yealink SIP-T46S Quick Reference Guide...
Note: You can split the conference call into two individual calls by pressing the press to select the Split soft key. desired ring time to wait before forwarding. 4. Press the Save soft key to accept the change. Yealink SIP-T46S Quick Reference Guide...
2. Follow the voice prompts to listen Value field. to your voice messages. 4. Press the Save soft key to accept the change. To use the speed dial key: Press the speed dial key to dial out the preset number. Yealink SIP-T46S Quick Reference Guide...
Option soft key and then select Detail from the prompt list. 3. Edit the contact information. 4. Press the Save soft key to accept the change. Yealink SIP-T46S Quick Reference Guide...
2. Press to select the Note: You can add contacts from the call desired ring tone. 3. Press the Save soft key to accept history easily. For more information, refer to Call History above. the change. Yealink SIP-T46S Quick Reference Guide...
Need help?
Do you have a question about the SIP-T46S and is the answer not in the manual?
Questions and answers
Is there a preset voice mail code? We were told out code didn't change, but it doesn't work to retrieve messages on this new phone
The Yealink SIP-T46S does not have a preset voicemail code. You need to configure the voicemail access code manually or use the system code *1 to access voicemail.
This answer is automatically generated
Hi, when my colleague's Landline phone rings (In the same office as mine) and the colleague is not on her desk, how do I answer the call from my landline phone (So that I don't have to get up and go to my colleague's desk). In other office that I worked it's call pulling a call. Please suggest.
To answer a call on your Yealink SIP-T46S phone when your colleague's phone rings, you can use the call pickup feature if it is configured in your phone system. Contact your system administrator to ensure the feature is enabled and to obtain the specific code for call pickup. Typically, you would dial the call pickup code (e.g., *97 or another defined code) followed by your colleague's extension to answer the call.
This answer is automatically generated
I want to change the name and number of my speed dial settings. When i press who is there currently I get a menu saying " 1. Type BLF List" 2. Account ID Line1" but not option to change the name or phone number