User Messages - Sam4s ER-180T Series Operation And Programming Manual

User Messages

The wrong key sequence has been used.
E00
- Press CLEAR
A PLU code greater than 500 has been entered.
E1
- Enter a valid code between 1 and 500
A Clerk code greater than 10 has been entered.
E2
- Enter a valid code between 1 and 10
The amount count (quantity) is over the limit.
E3
- Enter an amount below the value limit.
The date and time are required.
E4
- Program the date and time
A limit restriction has been added to this key preventing an amount entry.
E5
- This function has been programmed, see function status to remove limit
The item limit in the transaction has been reached.
E7
- Finalise the sale and begin another transaction
The Subtotal is required.
E8
- Press the SUBTOTAL key and continue with the action.
It is not possible to void this item.
E9
- Continue with normal operation.
This function is programmed only to accept a preset value.
E10
- Ensure a preset amount has been programmed to function or sales item.
This function is programmed only to accept a manual value.
E11
- Enter the required value for this function.
This operation requires an amount entry.
E12
- Enter the amount appropriate to the operation being carried out.
The requested function is not valid.
E13
- Attempt an accepted operation.
Electronic Journal report is full.
E14
- Reset the report with or without a print as per the reports chapter
It is necessary to declare amount of monies in drawer before report print.
E15
- Refer to the cash declared section within the reports chapter.
It is necessary to run a Z report as the next action.
E16
- Refer to the reports chapter for valid reporting operations.
Inactive function.
E17
- This function is set as inactive, see function status to enable key.
Receipt paper near end and/or The paper arm is not shut correctly.
PEA
- Insert a new 57mm thermal paper roll and/or close the paper arm
A Clerk must be signed on in order to operate the Register.
CLOSED
- Enter Clerk Number 1 to 10 and press the CLERK key. I.e. 1 CLERK
• • • • 40 User Messages