Getting Started; Unpacking - Sam4s ER-180T Series Operation And Programming Manual

Getting Started

Unpacking

Unpack and unwrap the cash register.
•
Locate in the packaging the following items:
•
Remove the cardboard protectors from the cash drawer.
•
Connect the adaptor cord to the right side of the register, and plug
•
the register power adaptor into a grounded socket.
The register is now ready to use and no reset procedure is
•
required, once the roll has been loaded (see following) refer to the
register chapter for operation sequences
• • • • 4
1 roll of 57mm thermal paper
1 journal spool
1 set of control keys