Sam4s ER-180U Operator's And Programming Manual
  1. Manuals
  2. Brands
  3. Sam4s Manuals
  4. Cash Register
  5. ER-180U Series
  6. Operator's and programming manual

Sam4s ER-180U Operator's And Programming Manual

Hide thumbs Also See for ER-180U:
Table of Contents

Advertisement

Quick Links

ER-180U Electronic Cash Register
Operator's and
Programming Manual
All specifications are subject to change without notice.

Advertisement

Table of Contents
loading

Related Manuals for Sam4s ER-180U

Summary of Contents for Sam4s ER-180U

  • Page 1 ER-180U Electronic Cash Register Operator's and Programming Manual All specifications are subject to change without notice.
  • Page 2 ATTENTION The product that you have purchased contains a rechargeable MS Lithium battery. This battery is recyclable. At the end of its useful life, under various state and local laws, it may be illegal to dispose of the battery into the municipal waste system. Check with your local solid waste officials for details concerning recycling options or proper disposal.
  • Page 3 Precaution Statements Follow these safety, servicing and ESD precautions to prevent damage and to protect against potential hazards such as electrical shock. Safety Precautions 1. Be sure that all built-in protective devices are 6. Observe the original lead dress, especially near the replaced.
  • Page 5 Servicing Precautions WARNING: First read the-Safety Precautions-section of this manual. If some unforeseen circumstance creates a conflict between the servicing and safety precautions, always follow the safety precautions. WARNING: An electrolytic capacitor installed with the wrong polarity might explode. 5. Check the insulation between the blades of the AC 1.

  • Page 7: Table Of Contents

    Contents Getting Started About the ER-180U ........................1 Unpacking ..........................1 Installing the Paper Roll......................2 Basic Features and Functions ..................... 3 Standard Hardware ...................... 3 Software Features ......................3 Display ......................... 4 Mode Key ........................6 Keyboards ........................7 Ram Clearing ..........................
  • Page 8 Program 500 - DEPARTMENT Status Programming ..........53 Program 520 - DEPARTMENT Price/HALO Programming........55 Program 530 - DEPARTMENT Descriptor Programming ........56 PLU Programming ........................58 Program 100 - PLU Status Programming ..............59 Program 200 - PLU Price/HALO Programming ............60 ii • Contents ER-180U...
  • Page 9 Clerk Secret Code Programming ................77 Mode Password Programming ................... 77 Clerk Description Programming ................78 Logo Description Programming ................79 Date and Time Programming ..................81 Machine Number Programming ................82 Program Scans ......................... 83 Contents • iii ER-180U...

  • Page 11: Getting Started

    Getting Started About the ER-180U The ER-180U features a 48-position keyboard with traditional raised keys. This keyboard will accommodate up to 16 DEPT keys and works best in retail stores, or shops where it is not necessary to place a large number of preset item keys on...

  • Page 12: Installing The Paper Roll

    Note: Spool is optional function. If you wish to use spool function, then contact your local SAM4s dealer for assistance. 2 • Getting Started ER-180U...

  • Page 13: Basic Features And Functions

    Cash, Check & Charge Payment Functions • Currency Conversion • Calculator Operation • Operation for up to 10 clerks • Tax Calculation by Percentage for up to Four Tax Rates • Electronic Sales Journal (2,000 line capacity) Getting Started • 3 ER-180U...

  • Page 14: Display

    The amount of the item, subtotal or total, is displayed in the Amount rightmost portion of the display Rear Display Message Change Due Negative entry Subtotal of the sale Total of the sale Change Due Numbered Error Conditions 4 • Getting Started ER-180U...
  • Page 15 CONSOL OVER REQ.SUBTOTAL NO VOID PLU REQ.PRESET VALUE REQ.OPEN VALUE REQ. AMOUNT INVALID FUNCTION EJ FULL REQ.CASH DECLARATION REQ. Z REPORT INACTIVE REQ. MODE PASSWORD STOP PRINTING FOR COOLING OF PRINTER RECEIPT PRINTER PAPER END Getting Started • 5 ER-180U...

  • Page 16: Mode Key

    • To select Register Mode using the fast track method enter 3 for REG and press the MODE MODE CALC NUMBER DISPLAY MODE VOID MODE (VOID) OFF MODE (OFF) REGISTER MODE (R) MANAGER MODE (X) Z MODE (Z) PROGRAM MODE (P) SERVICE MODE (S) 6 • Getting Started ER-180U...

  • Page 17: Keyboards

    Keyboards The ER-180U keyboard is shown below with the default legends and key assignments. This configuration has 16 keyboard Department locations. Programmable key locations are shown with a bold border. RCPT X/TIME CLERK MODE FEED CLEAR ON/OFF SALE CALC C/CONV (÷)

  • Page 18: Ram Clearing

    4. Display will show “= = = = = = = = = = = =” while proceeding. 5. When memory is cleared, the register prints a message “RAM ALL CLEAR OK!” Memory is cleared and the default program is installed. 8 • Getting Started ER-180U...

  • Page 19: Initial Clear

    3. Continue to hold the SUBTOTAL key and turn the power switch ON. 4. The message "****** INITIAL CLEAR OK! ******” prints when the initial clear is complete. This procedure will not affect register programming, or clear previously stored totals in ECR memory. Getting Started • 9 ER-180U...

  • Page 21: Operating Instructions

    Press MODE when outside of a sale to change mode position. MODE Press CALC when outside of a sale to use the ER-180U as a basic CALC calculator. Press to open the cash drawer when you have not already started a NO SALE transaction.
  • Page 22 Enter the tax number and press TAX to reverse the programmed tax status of a department or PLU key. For example, by using the TAX key prior to registering a taxable item, the item will be sold without sales tax added. 12 • Operating Instructions ER-180U...

  • Page 23: Clerk Sign-On/Sign-Off

    To sign on a clerk, press the clerk key, enter the clerk code, and then press the clerk key again. CLERK CLERK Clerk Code (up to 4 digits) To sign the clerk off, enter 0 (Zero) and press the clerk key. CLERK Operating Instructions • 13 ER-180U...

  • Page 24: Mode Password

    2. Enter password (4 digits) and press the PO key to terminate. Calculator Function You can use the ER-180U to perform simple addition, subtraction and multiplication calculator functions outside of a sale. Move to REG-Mode. Enter 1 0 0 and press CALC key. To exit from Calculator mode, press CLEAR key.

  • Page 25: Department Registrations

    Department Registrations All registrations on ER-180U are made into open or preset Departments. • Registrations can be into Departments by pressing the Department key on the keyboard. This system simplifies reporting by listing all items (regardless of how they are entered) on the financial report.

  • Page 26: Open Dept Entry

    000000 DEPT1: DEPT1 Preset Price DEPT Entry 1. Press a preset DEPT key. For example, THANK-YOU CALL AGAIN press DEPT 5: 25/05/2015 MON 09:23 DEPT5 $2.99 DEPT5 TOTAL $2.99 CASH $2.99 CLERK 1 000012 000000 16 • Operating Instructions ER-180U...

  • Page 27: Dept Repeat Entry

    2. Press a DEPT key. For example, press $5.98 CASH DEPT1: CLERK 1 000012 000000 DEPT1 3. To register a second item exactly as the first, press the DEPT key a second time. For example, press DEPT1: DEPT1 Operating Instructions • 17 ER-180U...

  • Page 28: Dept Multiplication

    $7.96 CASH 2. Enter an amount on the ten keypad. Do CLERK 1 000012 000000 not use the decimal key. For example, for $1.99, enter: 3. Press a PLU key. For example, press DEPT1: DEPT1 18 • Operating Instructions ER-180U...

  • Page 29: Dept Multiplication With Decimal Point

    1. Press a single item preset department THANK-YOU CALL AGAIN key. (or enter a price and press a single item open department key.) 25/05/2015 MON 09:23 For example, press DEPT 6: $3.71 DEPT1 TOTAL $3.71 $3.71 CASH CLERK 1 000012 000000 Operating Instructions • 19 ER-180U...

  • Page 30: Split Pricing

    CLERK 1 000012 000000 enter: X/TIME 3. Enter an amount on the ten key pad. For example, if the items are priced 3 for $1.00, enter: Press a department key. For example, press DEPT 1: 20 • Operating Instructions ER-180U...

  • Page 31: Plu (Price Look Up) Registrations

    3. Press the PLU key again. Preset Price PLU 1. Enter the PLU number; press the PLU THANK-YOU CALL AGAIN key. For example, enter: 25/05/2015 MON 09:23 $2.99 PLU1 TOTAL $2.99 $2.99 CASH CLERK 1 000012 000000 Operating Instructions • 21 ER-180U...

  • Page 32: Plu Multiplication

    25/05/2015 MON 09:23 DEPT1 T1 $2.99 TAX1 $0.30 2. Enter the item. In this example TOTAL $3.29 department #1 is normally CASH $3.29 CLERK 1 000012 000000 taxable: 3. The normal tax status is shifted. 22 • Operating Instructions ER-180U...

  • Page 33: Percent Key (+% And -%) Operations

    $10.00 you must use the decimal key. 33.333% For example, for 1/3 off enter: AMOUNT -3.33 TOTAL $6.67 CASH $6.67 CLERK 1 000012 000000 3. Press the -% key: 4. The discount is automatically subtracted. Operating Instructions • 23 ER-180U...

  • Page 34: Percent On Sale Total

    2. Enter the amount you wish to DEPT1 T1 $10.00 subtract from the sale, for -0.50 example for a $.50 coupon, enter: TOTAL $9.50 CASH $9.50 CLERK 1 000012 000000 Press the CLERK/ - (Minus) key. CLERK 24 • Operating Instructions ER-180U...

  • Page 35: Return Merchandise Registrations

    2. Enter the price of the item you wish to DEPT2 -2.99 return, and then press the PLU key where it TOTAL -2.99 was registered originally. CASH -2.99 CLERK 1 000012 000000 DEPT2 3. Total the sale with CASH, CHECK, or a CHARGE function. Operating Instructions • 25 ER-180U...

  • Page 36: Voids

    $1.29 VOID ******************* DEPT2 -1.29 CLEAR VOID TOTAL $0.00 CASH $0.00 3. Enter the price of the first item, and then CLERK 1 000012 000000 press the DEPT2 key where it was registered originally. DEPT2 26 • Operating Instructions ER-180U...

  • Page 37: Cancel

    VOID MODE **************** voids, returns, tax exemptions or any DEPT2 -2.99 other function. TOTAL -2.99 CASH -2.99 3. All totals and counters are corrected as if CLERK 1 000012 000000 the original transaction did not take place. Operating Instructions • 27 ER-180U...

  • Page 38: No Sale Operations

    CLERK 1 000011 00001 # / NS 4. Press CHARGE: CHARGE 5. The display will indicate “=” for total, the drawer will open and the receipt will print as in the example on the right. 28 • Operating Instructions ER-180U...

  • Page 39: Received On Account Operations

    CLERK 1 000011 00001 press CHECK. CHECK 4. Enter the charge amount received, press CHARGE CHARGE 5. You can continue to itemize receipts, or you can finalize by pressing or selecting the same received on account key. Operating Instructions • 29 ER-180U...

  • Page 40: Paid Out Operations

    000011 00001 press CHECK. CHECK 4. Enter the charge amount received, press CHARGE CHARGE 5. You can continue to itemize paid outs, or you can finalize by pressing or selecting the same paid out key. 30 • Operating Instructions ER-180U...

  • Page 41: Subtotaling A Sale

    2. Press SBTL. The subtotal will display with the message "Sub" indicated on the rear display. SBTL The subtotal can be printed if the system option is set. See "Print Option Programming" in the "Program Mode Programming" chapter. Operating Instructions • 31 ER-180U...

  • Page 42: Totaling And Tendering

    CALL AGAIN 2. To total a check sale, press CHECK: 25/05/2015 MON 09:23 CHECK PLU2 $7.96 TOTAL $7.96 3. The display will indicate the total CHECK $7.96 CLERK 1 000011 00001 amount of the check sale. 32 • Operating Instructions ER-180U...

  • Page 43: Tendering A Cash Sale

    $7.96 TAX1 $0.36 3. Press CHECK: TOTAL $14.30 CHECK $20.00 CHANGE $5.70 CHECK CLERK 1 000011 00001 4. The display will indicate the total amount of the check tendered and the change due, if any. Operating Instructions • 33 ER-180U...

  • Page 44: Totaling A Charge Sale

    2. Press one of the charge key if it is located on the keyboard: 25/05/2015 MON 09:23 PLU1 T1 $2.99 CHARGE PLU1 T1 $2.99 $1.99 PLU2 $7.96 TAX1 $0.36 TOTAL $14.30 CHARGE $14.30 CLERK 1 000011 00001 34 • Operating Instructions ER-180U...

  • Page 45: Tendering A Charge Sale

    25/05/2015 MON 09:23 the keyboard: PLU1 T1 $2.99 PLU1 T1 $2.99 CHARGE $1.99 PLU2 $7.96 TAX1 $0.36 TOTAL $14.30 CHARGE $20.00 CHANGE $5.70 CLERK 1 000011 00001 Operating Instructions • 35 ER-180U...

  • Page 46: Split Tender

    4. Enter the amount of check tendered by the customer. For example, enter $10.00 and press CHECK: CHECK 5. When the total tendered equals or exceeds the total due, the receipt will print and the transaction is complete. 36 • Operating Instructions ER-180U...

  • Page 47: Post Tender

    3. The display will indicate the total of the TOTAL $2.12 cash sale. CASH $2.12 CLERK 1 000011 00001 4. Enter the amount of the new tender, Press CASH: CASH 5. The display will indicate the change due. Operating Instructions • 37 ER-180U...

  • Page 48: Currency Conversion

    The currency symbol you program will display here. See 4. The display will indicate the amount of "Print Option Programming". foreign currency tendered and display $5.17 change due. The change due is computed in home currency! 38 • Operating Instructions ER-180U...

  • Page 49: Management Reports

    Z – RESET 2 – SBTL X – READ 3 – SBTL All Clerk Z – RESET 3 – SBTL Print Electronic X – READ 300 - SBTL Journal Reset Electronic Z – RESET 399- SBTL Journal Management Reports • 39 ER-180U...

  • Page 50: Cash Declaration

    $20.00 key. INPUT AMT $118.76 DRAWER TOTAL $375.83 DIFFERENCE $257.07 CASH CLERK 1 000091 000000 Enter the total of checks and press the CHECK key.. CHECK Press the CASH key to total the declaration. CASH 40 • Management Reports ER-180U...

  • Page 51: Report Samples

    ITEM +% TTL (+% key used as item % surcharge function) $0.00 Count and total for Sale surcharges -> SALE +% TTL (+% key used as sale % surcharge function) $0.00 Continued on the next page ... Management Reports • 41 ER-180U...

  • Page 52: Plu Report

    PLU Name -> DEPT22 PLU Sales Activity Counter & Total -> CNT 1 $4.95 DEPT25 CNT 5 $8.85 ************************ Count & Total of all PLUs -> TOTAL CNT TOTAL AMT $13.80 CLERK 2 000045 000000 42 • Management Reports ER-180U...

  • Page 53: Clerk Report

    *********************** CLERK 4 NET SALE $10.50 GROSS SALES $10.50 DRWR TTL $10.50 ************************ CLERK 5 ************************ CLERK 6 ************************ CLERK 7 ************************ CLERK 8 ************************ CLERK 9 ************************ CLERK 10 ************************ CLERK 2 000071 000000 Management Reports • 43 ER-180U...

  • Page 54: Balancing Formulas

    - (Sale Minus Key Total) NET SALE TTL Gross Total NET TTL RETURN MDSE VOID MODE -% (Sale Discount Total) - (Sale Minus Key Total) GROSS SALES TTL Grand Total Yesterdays Grand Total Gross Sales Total GRAND TOTAL 44 • Management Reports ER-180U...

  • Page 55: Service Mode Programming

    Service Mode Programming Overview The following procedures are done from the Service Mode menu: • Clear all totals • Clear grand total • EPROM Information Service Mode Programming • 45 ER-180U...

  • Page 56: Clear Total

    2. To Reset Grand Total, enter 30, and then press the SBTL key. SBTL EPROM Information 1. Move to the S-Mode. 2. To Scan EPROM Information, enter 50, and then press the SBTL key. SBTL 46 • Service Mode Programming ER-180U...

  • Page 57: Program Mode Programming

    Program Mode Programming Default Programming All programming (unless otherwise noted) is done in the PGM-MODE. Each section details a specific area of register programming. Program Mode Programming • 47 ER-180U...

  • Page 58: Tax Programming

    EX.) Tax 1: Vat on 12.345% 53 + SBTL + 12 + DECIMAL + 34521 + X/TIME +CASH Repeat for each System Option SBTL X/TIME CASH Decimal Tax Kind Tax No 48 • Program Mode Programming ER-180U...

  • Page 59: Tax Table Programming

    X/TIME key. 9. For each repeat break point, enter the high side from the sale dollar range and press the appropriate TAX key. 10. Press the CASH key to end the tax table program. Program Mode Programming • 49 ER-180U...
  • Page 60 9. Enter 1 0 8 (repeat break point), press the TAX key. 10. Enter 1 2 4 (repeat break point), press the TAX key. 11. Enter 1 4 1 (repeat break point), press the TAX key. Press the CASH key to complete the tax program. 50 • Program Mode Programming ER-180U...

  • Page 61: Overlay Descriptor Programming Methods

    0 0 4 6 8 CHAR. SUBTOTAL 0 0 4 7 8 CHAR. CASH 0 0 4 8 8 CHAR. HOME 0 0 0 1 5 CHAR. CURRENCY FOREIGN 0 0 0 1 5 CHAR. CURRENCY Program Mode Programming • 51 ER-180U...
  • Page 62 [[ VOID ]] [[ DEPT 5 ]] [[ VOID ]] [[ DEPT 5 * 2 Times ]] [[ DEPT 2 ]] [[ 9 ]] aBG9 [[ Wait 2 Seconds or TAX(Space) ]] [[ DEPT 5 ]] [[ RETURN ]] [[ DEPT 5 ]] [[ Wait 2 Seconds or TAX(Space) ]] 52 • Program Mode Programming ER-180U...

  • Page 63: Department Programming

    Enter the values you have selected, press the X/TIME key. (You do not need to enter preceding zeros.) X/TIME 5. To program additional DEPARTMENTs, repeat from step 3, or press the CASH key to finalize the program. Program Mode Programming • 53 ER-180U...
  • Page 64 No = 0 Yes = 1 Department is taxable by rate 1? No = 0 Yes = 1 Department is override preset ? No = 0 Yes = 1 Department is preset? No = 0 54 • Program Mode Programming ER-180U...

  • Page 65: Program 520 - Department Price/Halo Programming

    DEPARTMENT is preset, enter a preset price. (The maximum preset price you can enter is $50,000.00.) X/TIME Price/HALO 5. To program additional DEPARTMENTs, repeat from step 3, or press the CASH key to finalize the program. CASH Program Mode Programming • 55 ER-180U...

  • Page 66: Program 530 - Department Descriptor Programming

    4. Enter 12 three character codes.Refer to the descriptor code chart shown in the below. 065 080 080 076 069 X/TIME 5. To program additional DEPARTMENTs, repeat from step 3, or press the CASH key to finalize the program. CASH 56 • Program Mode Programming ER-180U...
  • Page 67 Ü ¢ £ ¥ CODE € CHAR SPACE " & CODE CHAR CODE CHAR < CODE CHAR > CODE CHAR CODE CHAR CODE CHAR CODE CHAR CODE CHAR CODE CHAR BACK SPACE Double CODE Program Mode Programming • 57 ER-180U...

  • Page 68: Plu Programming

    PLU is preset, or the high amount lock out (HALO) if the PLU is open. • Program 300 – PLU Descripor Programming allows you to set a unique, up to 12-character descriptor for each PLU. • Program 350 - PLU Link Programming allow you to link DEPTs. 58 • Program Mode Programming ER-180U...

  • Page 69: Program 100 - Plu Status Programming

    No = 0 PLU is taxable by rate 1? Yes = 1 No = 0 PLU is override preset ? Yes = 1 No = 0 PLU is preset? Yes = 1 No = 0 Program Mode Programming • 59 ER-180U...

  • Page 70: Program 200 - Plu Price/Halo Programming

    4. If the PLU is open, enter a HALO of up to 7 digits. If the PLU is preset, enter a preset price. X/TIME Price/HALO 5. To program additional PLUs, repeat from step 3, or press the CASH key to finalize the program. CASH 60 • Program Mode Programming ER-180U...

  • Page 71: Program 300 - Plu Descriptor Programming

    4. Enter 12 three character codes.Refer to the descriptor code chart. 065 080 080 076 069 X/TIME 5. To program additional PLUs, repeat from step 3, or press the CASH key to finalize the program. CASH Program Mode Programming • 61 ER-180U...

  • Page 72: Program 350 - Plu Link Programming

    4. Press a DEPARTMENT key on the keyboard you wish the PLU linked to DEPT1. 5. To program additional PLUs, repeat from step 3, or press the CASH key to finalize the program. CASH 62 • Program Mode Programming ER-180U...

  • Page 73: System Option Programming

    5. Repeat from step 3 for each system option you wish to change. 6. Press the CASH key to end system option programming. System Option Flowchart Repeat for each System Option SBTL X/TIME SBTL CASH Option # Status Program Mode Programming • 63 ER-180U...

  • Page 74: System Option Table

    Reset the PLU report Z counter after a Z1 PLU Yes = 1 report? No = 0 Reset the Clerk report Z counter after a Z1 Clerk Yes = 1 report? No = 0 Triple multiplication Yes = 1 No = 0 64 • Program Mode Programming ER-180U...
  • Page 75 Use Thousand separator No = 0 Yes = 1 Use Mode Password No = 0 Note: Spool is optional function. If you wish to use spool function, then contact your local SAM4s dealer for assistance. Program Mode Programming • 65 ER-180U...

  • Page 76: Print Option Programming

    5. Repeat from step 3 for each print option you wish to change. 6. Press the CASH key to end print option programming. Print Option Flowchart Repeat for each Print Option SBTL X/TIME SBTL CASH Option # Status 66 • Program Mode Programming ER-180U...

  • Page 77: Print Option Table

    No = 0 Print Grand total on the Financial report? Yes = 1 No = 0 Print Gross total on the Financial report? Yes = 1 No = 0 Grand total is: Net sale Gross sale Program Mode Programming • 67 ER-180U...
  • Page 78 Yes = 1 training mode operations? No = 0 Print the PLU/DEPT number on the receipt? Yes = 1 No = 0 Print the PLU number on PLU report? Yes = 1 No = 0 68 • Program Mode Programming ER-180U...

  • Page 79: Function Key Programming

    Program 90 - is used to set a high amount limit (HALO) In this chapter you will find: • General instructions for programs 70, 80 and 90. • Specific programming instructions for each function key. Program Mode Programming • 69 ER-180U...

  • Page 80: Program 70 - Function Key Options

    N6, just enter the value for N6.) Press the function key you wish to program. FUNCTION 4. To program additional function keys, repeat from step 3, or press the CASH key to finalize the program. CASH 70 • Program Mode Programming ER-180U...

  • Page 81: Program 80 - Function Key Descriptor

    3. Enter up to 8 three-character codes and press the FUNCTION KEY. Enter up to 8 FUNCTION three-character codes 4. To program additional function keys, repeat from step 3, or press the CASH key to finalize the program. CASH Program Mode Programming • 71 ER-180U...

  • Page 82: Program 90 - Function Key Halo

    HALO 4. Press the function key on the keyboard you wish to program. FUNCTION 5. To program additional function keys, repeat from step 2, or press the CASH key to finalize the program. CASH 72 • Program Mode Programming ER-180U...

  • Page 83: Cash/Check/Charge

    Yes = 1 No = 0 Exempt tax 4? Yes = 1 No = 0 Descriptor - Refer to “Program 80 – Function Key Descriptor” HALO - Refer to “Program 90 – Function Key HALO” Program Mode Programming • 73 ER-180U...

  • Page 84: Cancel

    CASH Address OPTION VALUE Key is inactive? Yes = 1 No = 0 Descriptor - Refer to “Program 80 – Function Key Descriptor” HALO - Refer to “Program 90 – Function Key HALO ” 74 • Program Mode Programming ER-180U...

  • Page 85: Currency Conversion

    The US dollar (home currency) is worth 1.3720 Canadian dollars (foreign currency). Exchange Rate Decimal Position The US dollar (home currency) is worth 110.24 Japanese Yen (foreign currency). Exchange Rate Decimal Position Program Mode Programming • 75 ER-180U...
  • Page 86 Note: If key is amount, enter 5 digit HALO, or 0 for no HALO. If key is percentage enter the percentage in a five-digit format, without the decimal (XX.XXX). For example: for 10%, enter 10000; for 5.55%, enter 05550; for 99.999%, enter 99999. 76 • Program Mode Programming ER-180U...

  • Page 87: Miscellaneous Programming

    2. To begin the program, enter 9 9 9 9, press the SBTL key. SBTL 3. Enter a secret code (up to 4 digits); press the X/TIME key. Enter the secret X/TIME code, up to 4 digits 4. Press the CASH key to finalize the program. CASH Program Mode Programming • 77 ER-180U...

  • Page 88: Clerk Description Programming

    3. Enter the number of the clerk you wish to program; press the X/TIME key. X/TIME If you are programming Enter up to 8 SBTL three-character codes 5. Press the CASH key to finalize the program. CASH 78 • Program Mode Programming ER-180U...

  • Page 89: Logo Description Programming

    3. Refer to the chart above and enter the number that represents the line you wish to program; press the X/TIME key. X/TIME 4. If you are programming Enter up to 24 three- SBTL character codes 5. Press the CASH key to finalize the program. CASH Program Mode Programming • 79 ER-180U...
  • Page 90 Refer to the chart above and enter the number that represents the line you wish to program; press the X/TIME key. X/TIME If you are programming Enter up to 24 three- SBTL character codes Press the CASH key to finalize the program. CASH 80 • Program Mode Programming ER-180U...

  • Page 91: Date And Time Programming

    Date and Time Programming Use this program to set the clock and calendar on your ER-180U. The date changes automatically. After initial setting, time changing will probably be required only for beginning and ending daylight savings time. Programming the Date and Time 1.

  • Page 92: Machine Number Programming

    2. To begin the program, enter 1 6 0 0, press the SBTL key. SBTL 3. Enter a machine number (up to 6 digits); press the X/TIME key. X/TIME 4. Press the CASH key to finalize the program. CASH 82 • Program Mode Programming ER-180U...

  • Page 93: Program Scans

    To read multiple PLU program information, enter the first number and press PLU key. Press the last number and press PLU key Enter thefirst Enter the last PLU#, up to 500 PLU#, up to 500 Program Mode Programming • 83 ER-180U...
  • Page 94 OTHERS PROGRAM SCAN X/TIME Program System option Print option Function keys Clerk Preamble message/ Postamble message 4. Press the CASH key to finalize the program. CASH 84 • Program Mode Programming ER-180U...
  • Page 95 J K 6 8 - 8 0 1 8 2 B ( R e v . 0 1 )

Table of Contents