Connecting Via Wireless Lan - JVC GY-HM250U Instructions Manual

Connecting via Wireless LAN

Connection via Access Point
1 Perform setting on the camera recorder,
and start up the [Wizard] screen.
(A P150 [Camera Setup for Network
Connection] )
2 [Wireless LAN] appears on the [Wizard]
screen.
Available Adapter
Wireless LAN
Back
.
3 Press the I button to display the [Select
Connection Type] screen.
Select "Connect with Access Point".
Follow the screen instructions to complete
setting. Perform setting for the following.
Mode of connection
0
Method of setting
0
* SSID, type of encryption, Passphrase, and
IP Address setting ("DHCP" or "Manual") in
cases other than WPS
Select Connection Type
P2P
Connect with Access Point
Back
.
4 Setting is complete.
After setting is complete, you can access the
camera recorder via a web browser.
(A P158 [Connecting from a Web Browser
n] )
Next
3
Next
P2P Connection
You can access the web function of this camera
recorder from devices such as a smartphone,
tablet terminal, or PC.
1 [Wireless LAN] appears on the [Wizard]
screen.
Available Adapter
Wireless LAN
Back
.
2 Press the I button to display the [Select
Connection Type] screen.
Select "P2P".
Follow the screen instructions to complete
setting.
Perform setting for the following.
Mode of connection
0
Method of setting
0
* SSID and Passphrase in cases other than
WPS
Select Connection Type
P2P
Connect with Access Point
Back
.
Memo :
When "WPS" is selected in the [Select Setup
0
Type] screen, the following steps 3 and 4 are not
required.
3 Set the camera recorder to the Camera
mode, and display the [Network] (status)
screen.
Press the [STATUS] button on the camera
0
recorder to display the status screen.
Press the cross-shaped button (HI) to
display the [Network] screen.
Check to ensure that the [SSID] and
0
[Passphrase] that you have set in the wizard
are displayed.
Preparing Network Connection n
Next
2
Next
151